Hudsonator
Registered: November 2006
Location: Tennessee
Posts: 99
users gallery
|
The T-86 Needle bearings are on the right, T-90 needle in the middle, and the Single lever needles on the left. I had not counted on finding this much difference, but is the first time I had them all laid down next to each other. The T-86 needle is .217" in diameter and 0.512"long. The T-86 needles were damaged on the ends as they had been galled against the input shaft and mainshaft, the length may not be very accurate. The T-90/T-86 replacement needles are .218" in diameter and 0.740" long. The Single Lever needles are 0.187" diameter and .525" long.
|
