Hudsonator
Registered: November 2006
Location: Tennessee
Posts: 99
users gallery
|
The Double Lever T-86 is on the right. It has a total length of 8.232". The Single lever on the left has a total length of 8.410". The dimentions from the face of the blocker ring taper to the gear face is the same. The distance, diameter, pitch, and tooth count of the lockup ring is the same for both input shafts. The Single lever has a step above the gear face for the bearing and is longer between the clutch spline and the taper ahead of the bearing seat.
|
