Find A Classic Car
Thousands of listings here >>

Make:

Model:

sell your classic car
FREE to list - Online until sold

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: r2hud308
Joined: -
Visits: 0
Last Active: 8:31PM
Roles: Hitchhiker
Posts: 34

r2hud308

Vacuum advance for an 8
51 Com

Comment by r2hud308 April 26 permalink
What's the deal with K-Gap?
Eat a rubber tree and extrude your own rubber,or order from K Gap with the same results..............your but ends up sore

Comment by r2hud308 January 26 permalink
Will a Hash 308 swap into a 52 Nash
The 55 thats rotted out have a heater core in it ? I have been lookin all over for 1.

Comment by r2hud308 January 9 permalink
Hudson Disk Brake kits, once again available
Matt,I did put 1 of the MC kits on a 52 Super Wasp.It was a couple years ago so I dont remember much other than the brake peddle arm comes out a bit different(passes through the subframe). Had to bust out the porta band and the mig,but it did work. …

Comment by r2hud308 January 3 permalink
47 ? P/Up
Thanks Larry,im building this truck that was nearly ready for the crusher out of a bunch of part cars mostly Hudsons.51 Com 8 front end parts ,engine and tranny,40 travler front fenders and grill,steering box and column,and dash bits,50 pacemaker ta…

Comment by r2hud308 December 2012 permalink
1929 interior
Try keystonekenny@aol.com Thats my brother and he has my dads old 29 at his shop

Comment by r2hud308 December 2012 permalink
Hudson 8
Thanks guys,should have wrote it down the 1st 2 times I did this job.When I did the Miss Daisy car it had a broken exhaust manofold so I adjusted valves with the manofold off and it made it easy to figure out whats up.

Comment by r2hud308 December 2012 permalink
lookin 4 a start switch
Let me know if you have 1 Matt and if your willing to sell it. Thanks , >>>HUD

Comment by r2hud308 December 2012 permalink
53 Coupe
Thanks,the car HAS a TH motor,just no emblem on deck. Guess I just need to find an emblem.Does any1 have 1 ?

Comment by r2hud308 November 2012 permalink
THG
OOPS ! Sorry guys,im new here and tryed editing my post and somehow erased it,heck I dont remember what I posted now,I got all new problems today,

Comment by r2hud308 November 2012 permalink
THG
All have been stockers Park,you are correct on the amount of advance isnt much, about only 3degrees on most with the pacemakers around 7. I have also been changing that as well to around 10 by trimming metal from advance arm

Comment by r2hud308 November 2012 permalink
Stepdown Front Wheel Bearing Seal P/N's
Dont have a part # but I think most 60s and 70s 9" will work. What I liked about it is the seal was the same inside and outside diameters ,but it was a bit thicker which meant the lip would be riding on a brand new surface

Comment by r2hud308 November 2012 permalink
Going rate for Twin H manifold?
Be carefull,most TH manofolds are broken inside where you cant see. Flip the manny upside down and pour water in the exhaust chamber and watch it pour out the intake ports. Thanks to the early technology of the heat riser. The flap on the riser stic…

Comment by r2hud308 November 2012 permalink
54 hudson Hornet 7D
Thought I was the only 1...........I had a 54 hornet and did away with all that goddy trim crap too,all the trim does is rot a car out.Great looking Hudson there.

Comment by r2hud308 November 2012 permalink
Stepdown Front Wheel Bearing Seal P/N's
I used a 9inch ford rear wheel bearing seal and it worked

Comment by r2hud308 November 2012 permalink
Searching for stainless piece, '54
The Twin H Garage has it r2hud308@aol.com

Comment by r2hud308 October 2012 permalink

Thousands of Classic Cars for Sale - Free to List.

Since 1996 we're been the place to go to for all things Classic Car. Classifieds, news, events, community and so much more. No clutter. No hassles. Just Classic Cars.

We'd love to hear from you! info@classiccar.com

We accept no responsibility for inaccuracies. All trademarks acknowledged.

ClassicCar

Howdy, Stranger!

About

r2hud308

We'd love to hear from you! info@classiccar.com