Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: hudsn47
Joined: -
Visits: 1
Last Active: 1:46AM
Roles: Senior Contributor
Posts: 112

hudsn47

Brackets for Twin H oil bath air cleaners
Those are great pictures of the brackets, thanks! Maybe they had a different bracket for the 54? I saw an old post where Doug Wildrick had reproduced some brackets at one time. They dont look to hard to make if I just had the fabrication skill.

Comment by hudsn47 May 17 permalink
What are you using for spark plugs and distributor cap?
Might try Rock Auto online if you haven't already. They show points/condensor and plugs for your car. I don's see the distributor cap. I know the tune up parts are available at NAPA.

Comment by hudsn47 May 15 permalink
Hudsons in Labor Day Auctions!
Doubt we hear back from carsofchaos, way to go guys. This is a young guy expressing his love for Hudson's in his own way. I think each generation has it's own way of verbal expression, what's it called Brownie, slang? I personnaly hop…

Comment by hudsn47 May 15 permalink
2 BAD IDEAS
Brownie, that is rockin it for sure. When I got out of HS I was in a 62 Rambler Classic and thought I was rocking it but of course I wasn't rocking it at all. But when I got out of Army OCS I was driving a 68 Chrysler Imperial Crown Coupe, rock…

Comment by hudsn47 May 9 permalink
Hudson Hornet - My Classic Cars - Tonight 5/7/13 on Velocity at 10:30 PM ET
I recorded it and watched it last night and thought it was great. I did cring a little when Wayne fired it up first time and revved the heck out of it. Good exposure for the Hudson brand.

Comment by hudsn47 May 9 permalink
2 BAD IDEAS
Henry cranked out alot of model A's, almost a million a year from 1927 - 1931, over 4 million. How many survived beyond WWII?? I'm going to say still less Model A hotrods percentage wise compared to Hudson just based on production/survival…

Comment by hudsn47 May 9 permalink
2 BAD IDEAS
The model A guys are extremely dedicated to preserving their cars and have a fantastic forum at the Ford Barn. One guy even posts like its his dog talking, hilarious.

Comment by hudsn47 May 9 permalink
2 BAD IDEAS
Got this from the Model A Ford Forum. Thought it was funny.

Comment by hudsn47 May 8 permalink
Early dealer details
Greenup Illinois

Comment by hudsn47 March 24 permalink
1953 sedan on eBay
If the car sold for $7500 why is it saying reserve not met?

Comment by hudsn47 March 14 permalink
Twin H manifolds on ebay
The free shipping is what caught my eye.

Comment by hudsn47 March 11 permalink
Twin H manifolds on ebay
I have reported it twice. Guess Ebay thinks its ok if they paid attention to the report.

Comment by hudsn47 March 10 permalink
A Newcomer to this site
Welcome!

Comment by hudsn47 March 8 permalink
Updates on the 52 Pacemaker
This is a great post and I can tell you are enjoying your labors and doing great work. Try stepdownplastics.com for your turn signal knob. I see Roger above has weighed in already on the springs. Again thanks for taking the time to post your progres…

Comment by hudsn47 March 5 permalink
Kano is running a special on Kroil--
Appreciate the info!

Comment by hudsn47 February 22 permalink
Single wide belt A/C compressor, alternator bracket for Stepdown six cylinder.
Would this be the photos you are looking for?

Comment by hudsn47 February 21 permalink
tested my gas gage and it works!
Por 15 on the 47 C8 after having the tank boiled. Had enough left over to do two motorcycles. Thinking if if you don't seal it , in a couple years you will be back where you started. Doug

Comment by hudsn47 February 6 permalink
Door Sill Plates Installation
Reminds me of plumbers putty, not that I would ever use it on my car. :-$

Comment by hudsn47 December 2012 permalink
Help engine parts needed
I got a camshaft for the Pacemaker from Dale Cooper. Hudzilla on here may have one as well.

Comment by hudsn47 November 2012 permalink
brakes
Shoes on one side contaminated is a possibility changing the friction, doesn't take much. Need to replace both sides if this is the case. This happened to me on the 47 and it pulled bad. Took it apart and could see the film on the shoe. It was …

Comment by hudsn47 September 2012 permalink
Hudsons for the Heros
I was stationed there 1993 - 1995, commanding a basic training company. Wish I could go also, maybe next year. Hope it's close to some of the barracks or the PX to get the attn of the basic training troops. They will enjoy the escape from the …

Comment by hudsn47 September 2012 permalink
1952 hudson hornet for sale in columbus oh
Yes, I made the trip up to OH to check out this car and meet the owner and bought the Hornet. Previous owner had it for 25 years and has added some interesting non Hudson options that I think I will leave on it. One option is an air horn off a Cadel…

Comment by hudsn47 March 2012 permalink
1952 hudson hornet for sale in columbus oh
This looks like the Hornet I've been waiting for. Sent you a PM.

Comment by hudsn47 February 2012 permalink
Pigeon Forge, TN....Hudsons in the Heartland Meet
We are going, driving the Pacemaker from Huntsville, AL. Looking forward to meeting everyone and going to Dollywood!!

Comment by hudsn47 August 2011 permalink
What make, model and year is this car?
I'm going to say 41 Plymouth just for fun. Someone here will know exactly what it is.

Comment by hudsn47 September 2012 permalink
Source for Brass Fittings
Ceramic filters are availabe look on eBay or Lance Walker probably has one. Paper filter inserts are available I recently found out, I know napa has them. That's what I'm going with so I know its clear. The old ceramic ones aren't alw…

Comment by hudsn47 September 2012 permalink
Source for Brass Fittings
John, that would be the one! I have contacted one of our vendors who is sending what I need to connect the bowl to Twin H. I'm guessing this is what he's sending. Thanks for confirming it exists, I was going crazy looking for it. Maybe I w…

Comment by hudsn47 September 2012 permalink
Source for Brass Fittings
Question: I'm at the end of my search and still cant find the right brass fitting to connect the carter glass bowl to the twin H carburetor. It would be the fitting that would connect between the Tee on the left and the glass bowl, see picture.…

Comment by hudsn47 September 2012 permalink
1953 super wasp ready for test run tomorrow and some pictures
Looks good. Love the black ones!

Comment by hudsn47 September 2012 permalink
Source for Brass Fittings
That is a good site and very user friendly and good prices. Some of the sites are very high prices and high shipping and handling. Thanks!

Comment by hudsn47 September 2012 permalink

More Comments

ClassicCar

Howdy, Stranger!

About

hudsn47

We'd love to hear from you! info@classiccar.com