Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: glens46golden
Joined: -
Visits: 0
Last Active: May 30
Roles: Senior Contributor
Posts: 94

glens46golden

Chopped Top "Old School" 1953 Coupe
No, the back has not been extended.

Comment by glens46golden June 2010 permalink
Convertible wanted
dave s wrote: The black 48 that was restored by Davis Brothers sold for 185,000.00 last year. Keith Waite of Salt Lake City has a 1948 or 49 Commodore 8 convertible for sale for $10,000.00. The car runs but needs a complete restoration. H…

Comment by glens46golden May 2010 permalink
Looking for set of Stepdown Coupe Threshold Plates
If what you're looking for are painted black and have ribs, I have a pair for sale.

Comment by glens46golden May 2010 permalink
Lug Bolts?
If you pay for shipping, I'll send you as many as you need.

Comment by glens46golden May 2010 permalink
1936 hudson Terraplane for sale
Seller would be lucky if he got an offer for 5K. No one would be dumb enough to pay 15K.

Comment by glens46golden May 2010 permalink
The $128,000 Question
The light blue Super Wasp with the for sale sign was once mine. It was sold new by Harry Luff in Salt Lake City. The lady who bought the car "gave" it back to the Harry Luff Hudson dealership in the late 1960's when she became too …

Comment by glens46golden May 2010 permalink
Hudson in a movie
The first time I saw this Hudson was in a museum somewhere near Rapid City in the late 1970's. The next time I came across it was when it sold at an auction in Denver in the WTN.

Comment by glens46golden April 2010 permalink
'41 Hudson Coupe at Super Cruise Sunday at Hillco Fastener
...and for those who like to know the complete story, Craig's coupe is a 1946 with a 1941 grille.

Comment by glens46golden February 2010 permalink
Hudson Hood Ornament?
I think that is for a 1948-49 Super-six model.

Comment by glens46golden January 2010 permalink
Is this a Durham Limo ?
At least one of the three Durham's was updated at the Hudson factory with 1951 dash and grille.

Comment by glens46golden December 2009 permalink
Need some Hudson parts
Hello Michael, Yes, many of these parts could be reproduced and some are. However, most of these parts are still around in HET members garage and basements.

Comment by glens46golden November 2009 permalink
53 Kustom
This is for Mike who has an inquiring mind. There is more to the story. The present owner took the Kustom as a pay off for money he was owed. When he arrived in SLC to pick up the Kustom, he was surprised it was not finished. I think he had ex…

Comment by glens46golden October 2009 permalink
53 Kustom
No work was done on the Kustom after the photos were taken. The car was sold and I doubt that anything will be done with it unless there is a new buyer. I'm glad someone likes the 1946 grille treatment, as this was my suggestion. If anyone i…

Comment by glens46golden October 2009 permalink
49 Commodore Front Bumper WANTED
1948-1950 Hudson front bumpers will fit. No bumper that used a front horsecollar will fit on a 48-50 Hudson.

Comment by glens46golden September 2009 permalink
Drive Master and Cord Magic Hand
I seem to recall reading that Tucker removed the driver master from Hudsons in the junkyard and rebuilt them for the Tucker car.

Comment by glens46golden August 2009 permalink
looking for good front bumper for 49'
Please email my at GMC46golden@aol.com regarding a front bumper for your 49 Hudson. Thanks, Glen

Comment by glens46golden June 2009 permalink
Hudson in the movies
silverone wrote: Glen, would there be any chance of getting you to email me a couple pictures of your '54 Coupe? The reason I ask is that I'm thinking of doing my '54 coupe up in black too, but not sure if I'd like the f…

Comment by glens46golden May 2009 permalink
Hudson in the movies
I was paid over $400.00 from the film company for using my black 1954 Hornet coupe in "A Home of Our Own with Kathy Batres" but never saw my Hudson in the film. This movie was filmed in Heber City, Utah.

Comment by glens46golden May 2009 permalink
gas tank on stepdown painted or galvanized
I don't think that stepdown gas tanks were painted. They were galvanized. My guess is that would mean they were silver in color.

Comment by glens46golden April 2009 permalink
antenna @#$%^*
What I've found helpful to remove the knob is to enlarge the hole where the screw is. Of course, you need to locate the screw first. I drill out the hole with a larger drill bit and then I find a screwdriver will fit better.

Comment by glens46golden March 2009 permalink
Hudson Deaer Information
Here is Harry Luff's dealership in Salt Lake City in 1940. dealership is located at 13th south and 700 east. You might find it interesting that the 1937 Terraplane pickup is now mine and the one shown in the upper left corner.

Comment by glens46golden February 2009 permalink
52 - 3 Grill Part Needed
Lew, if you haven't found the grille piece you need, I have one you can have for shipping cost. Best, Glen

Comment by glens46golden November 2008 permalink
Parting out a 53 Hornet
Do any of your stepdowns have front or rear vent window frames without a lot of rust that would recchrome nicely? I also need a pair of chrome pieces that fit below the truck and that fit into the directional light housings. Please email me at GMC…

Comment by glens46golden April 2008 permalink
Need Hudson cores for chroming
Is this Andrey from Russia? Yes, this is my 1937 Terraplane pickup. The pickup and I are the same age. You might want to note that this pickup has door off a coupe. I have stretched the cab 7 inches to give me a little more leg room.

Comment by glens46golden March 2008 permalink
Stepdown Front Bumper Identification
If he changed the mounting brackets, the bumper would fit, the bumper guards would fit and even the guard that runs under the bumper would fit, but the bar that runs from the top of one guard to the other guard would not be in the correct position. …

Comment by glens46golden March 2008 permalink
Stepdown Front Bumper Identification
What makes indentifcation difficult is that all stepdown front bumpers were stamped from the same mold and that there is no parts number on the bumper. The center measurement you listed as 20 1/2 inches is correct for all Hudsons that use a horseco…

Comment by glens46golden March 2008 permalink
Need Hudson cores for chroming
Hello Vic, Yes, I'll see you in San Jose and will pay for one gallon of gas! Best, Glen

Comment by glens46golden March 2008 permalink
1953 Hornet Convertable ??
Russ, to put power steering on your 53 Hornet, you will need to drill one hole. Glen

Comment by glens46golden January 2008 permalink
Who else got ripped off?
It was my belief that if I was cheated, maybe others were too. My plan was to gather names and theN contact the post authority. As things turned out, there was no large fraud against Hudson members and things have been worked out. I thought lots …

Comment by glens46golden December 2007 permalink
Supercharged '36 Packard Coupe
Here is a photo of my triple intake manifold. It was my intent to use this on a 308 in my 37 Terraplane pickup. However, everyone informed me that the Terraplane had too short of a front end and too much weight would hang over the front axle makin…

Comment by glens46golden December 2007 permalink

More Comments

ClassicCar

Howdy, Stranger!

About

glens46golden

We'd love to hear from you! info@classiccar.com