Find A Classic Car
Thousands of listings here >>

Make:

Model:

sell your classic car
FREE to list - Online until sold

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: MT46 Hudson
Joined: -
Visits: 0
Last Active: July 2007
Roles: Hitchhiker
Posts: 11

MT46 Hudson

46 Coupe on an S10 Chassis
Sounds like a good project and probably not any more work than using a fatman front end. the fender on the front will requre some aditional fab. Please let me know how it goes. S

Comment by MT46 Hudson January 2008 permalink
Sonny's '46 Hudson Build -
The Fatman went in with little problem. It was a little of in width split my frame and added some fish plates. The spendels lined up with the center of the wheel wells as you can see in some of the later pics. Rick will get some updated pics in the …

Comment by MT46 Hudson January 2008 permalink
Sonny's '46 Hudson Build -
I will be taking the master brake out in a few weeks as I start the under dash work. I will send a pic then.

Comment by MT46 Hudson January 2008 permalink
Sonny's '46 Hudson Build -
Thanks for the tip will let you know how it works. I know that I m pushing the max on master cylinder may have to go up next bore diameter. that should give me preasure and volume to be safe. I have about an inch between AC and master. I will proba…

Comment by MT46 Hudson June 2007 permalink
Sonny's '46 Hudson Build -
jsrail wrote: Nice Sonny! Are you using the original accelerator pedal or aftermarket? Which a/c unit are you using? What unit is the master cylinder/booster? Coming along nicely dude! Jay Jay the master brake set up is fr…

Comment by MT46 Hudson June 2007 permalink
Sonny's '46 Hudson Build -
harcoequip wrote: Nice! Someone's putting some time and $$$ into that car. I would like to see it when its done. I must appoligise to everyone for taking so long to reply. thanks for all the kind words about the HUdson and my shop. …

Comment by MT46 Hudson June 2007 permalink
Has anyone street rodded a 46 hudson coupe??
jsrail wrote: I'm so jealous of you guys who can do a frame-off! I have been keeping a log of every thing I'm doing so others will have the info on what and how this went togeather. I will post exact parts and locating points. I k…

Comment by MT46 Hudson September 2006 permalink
Has anyone street rodded a 46 hudson coupe??
jr38special wrote: I would love to see some pictures and ideas to street rod a 46 hudson super six. The plans so far are a 350 sbc with a 4 speed transmission. Thanks JR new guy JR I M in the early stages of building a 46 coupe street rod…

Comment by MT46 Hudson August 2006 permalink
GOODGUYS Puyallup WA event
Mike (WA) wrote: While we're talking shows, anybody taking a car (or just going) to the Goodguys at the Puyallup fairgrounds July 14-16? I hope to be there with my red and white '48 coupe, probably just Saturday. Stop by, and we can sw…

Comment by MT46 Hudson June 2006 permalink
5th Annual Alberta Hudson Meet
I would very much like to come up, but will not be able to. However if a rear window for a 46-47 Hudson should become avaliable please let me know.Have a great show.

Comment by MT46 Hudson June 2006 permalink
Value of a 46 Hudson super six coupe?
I found a 46 coupe here in MT.it was a little rough and the some of the stainless was bent. So I decided to rod it. Choped the top 2" put a fat man front clip and a ford 9" rear end. Im looking for a rear glass and top grill chrome. The co…

Comment by MT46 Hudson June 2006 permalink

Thousands of Classic Cars for Sale - Free to List.

Since 1996 we're been the place to go to for all things Classic Car. Classifieds, news, events, community and so much more. No clutter. No hassles. Just Classic Cars.

We'd love to hear from you! info@classiccar.com

We accept no responsibility for inaccuracies. All trademarks acknowledged.

ClassicCar

Howdy, Stranger!

About

MT46 Hudson

We'd love to hear from you! info@classiccar.com