Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: Billy Clanton
Joined: -
Visits: 0
Last Active: July 2006
Roles: Expert Adviser
Posts: 152

Billy Clanton

well... i pulled this out of a feild, itset me back 400$
Howdy WOW! Thats the best weed pull-out I ever saw! I will say that it hasn't been there too many years or you live in Arizona! I'll say that you got a helluva deal Billy

Comment by Billy Clanton September 2006 permalink
for sale!!!
Howdy Looks like a clean ride & the price aint bad. Just don't expect a lot of replys on this board. I usta have 2 Hudsons, a '50 Pacemaker & a '53 Hornet. Sold them, and went with a '50 Chevy Fleetline. If you wern…

Comment by Billy Clanton September 2006 permalink
Question about affecting value of 57 Bel Air Conv
Howdy Well, everything you want to put on the care was available as options on that model. I would put the original stuff on it and that way, you would have the power options but it would still be "stock". I had a '57 Conv. back i…

Comment by Billy Clanton May 2006 permalink
51 Chevy Belair parts
Howdy About the only thing different in the '51 & '52 Chevy is the grill. The '52 grill had teeth. The '52 also had a chrome piece on the rear fender that the '51 did not. I have never had good luck removing glass w…

Comment by Billy Clanton May 2006 permalink
wondering about.......
Howdy Well, that engine compartment gets a mite crowded with just a smallblock Chevy motor. The bigblock is gonna hafta have major steering and frame clearance problems. You are gonna hafta go to an open drivetrain, and later model tranny. Not…

Comment by Billy Clanton May 2006 permalink
Power Steering for 51 chevy
Howdy I have a 1950 Chevy Fleetline, and have the stock steering. Most of the ones I have seen are doing the front clip thing, where you convert everything to later model stuff or do the Mustang II set-up. Chevy came out in '54 with PS and…

Comment by Billy Clanton May 2006 permalink
1964? Chevy biscayne
Howdy. Well, I think that its a 4 door. I almost bought a '64 Biscayne in '66 that had a 409 in it. Old Police Intercepter. Seems like the front doors were longer and the back window was shorter. Almost like a hardtop but with posts. …

Comment by Billy Clanton April 2006 permalink
I Need Your Advice Quick!! Is Ebay Safe?
Howdy Thats a pretty wide margin, but, if this person is talking about a cash man-to-man deal, it may be that way. Ebay is an auction, and maybe he is hoping for a windfall. Stranger things have happened on Ebay. Overall, ebay is OK to buy stuf…

Comment by Billy Clanton April 2006 permalink
Please I.D. This Hood Ornament
Howdy I think its off of a 1949-52 Chevy. Saw one on Ebay a while back and that was what it was listed for. Wanta sell it? Billy

Comment by Billy Clanton April 2006 permalink
1964? Chevy biscayne
Hello. Whats that got to do with what the guy asked?? If you can send a pic of your 64? I guarantee you that it will get ID'ed Billy

Comment by Billy Clanton April 2006 permalink
NEED HELP! what kind of car is this? im buying it!
Yep, links don't work, and now ya got my curiosity up! Billy

Comment by Billy Clanton April 2006 permalink
VIN stamped on frame or urban legend?
Howdy Back in 1963, I bought a 1938 Chevy 2 door sedan. A few years later, I pulled the front cap, and there was the date of mfg. stamped on the left inner framerail,7-12-37. I don't recollect any other tags except the one on the firewall …

Comment by Billy Clanton March 2006 permalink
1972 Chevelle SS 402 Matching Numbers 4-Speed
Nice Chevelle, but How Much? Also, the site link didn't work on my comp. Billy

Comment by Billy Clanton March 2006 permalink
1964 Chevy Impala 3 speed/overdrive HELP!! PLEASE
Howdy. I am in agreeance with the above post. I had 2 '64's. One was a 4 speed, 300 horse 327, with no power, and the other was a 250 horse 327 with all power & air. They were both SuperSports. Part of the SS package was the buck…

Comment by Billy Clanton March 2006 permalink
Just thought that I would say Hello
Howdy There is a dealer in old cars called Hillbilly Hot Rods and he is located somewhere in the SoMo area. You might check the Old Skool Rodz website and find some info. Keep lookin' they are out there. Billy

Comment by Billy Clanton March 2006 permalink
1959 Bel-Air
Howdy Well, welcome to Oldie car collecting. You probably don't have much of a problem that a good tuning and setting won't cure. The Holley carb usually needs some fiddling with. I would think about maybe replacing the Holley with t…

Comment by Billy Clanton March 2006 permalink
Coker Classic www tires for sale
Howdy I am in Memphis, and am interested in the tires. I sent a PM, at least I think I did! Billy

Comment by Billy Clanton March 2006 permalink
Hello
Howdy. Thanks. Yep, just seems like this could be a real good forum, just that hardly anybody ever posts here. Now, over on the Hudson page, they get 30 or 40 posts a day. Oh, well???? Billy

Comment by Billy Clanton March 2006 permalink
69 Lemans: Need advise on a Differential, selling my new 4:10
Howdy Back in 1967, I had a '66 ChevyII Nova SS with the FX 327/350 horse engine. It had a 3.36 positraction rear end and that unit would bury the hand in 3rd gear at 130, then ya shift to 4th! I was clocked on radar once at 156, and it wa…

Comment by Billy Clanton February 2006 permalink
Question about online auto sales
Thanks, guys. I did hear from him today. I guess I may hafta do just that Billy

Comment by Billy Clanton February 2006 permalink
Post war 1950 Chevy
Just an update, if theres anybody out there reading this site. We have gotten the '50 somewhat cleaned up, and are waiting for better weather to hang the '55 rear end, which we re-worked with new pinion shaft seal, wheel cyls, brake shoes…

Comment by Billy Clanton February 2006 permalink
1950-52 chev, 2 dr. wanted
This is the collector club site. http://www.nationalchevyassoc.com/ They sell parts and have a newsletter. Its 1949-54 Chevys Also punch in "1949 Chevy" on ebay Billy

Comment by Billy Clanton January 2006 permalink
stepdown front frame for sale
Howdy Do you know about what year it is? And what would you be askin' for it? Billy

Comment by Billy Clanton January 2006 permalink
step-down street-rod coupe
Hmmm, well, thats different. Which ones are for sale?? Billy

Comment by Billy Clanton January 2006 permalink
What makes a rat rod.
Howdy Thanx for the info. I will try to contact him tomorrow Billy

Comment by Billy Clanton January 2006 permalink
49 brougham street rod on eBay
Howdy Yep, it has had some time & effort done on it. That is a 59-60 Chevy dash. Looks like the seats are from a Lincoln. It is done tastefully, with only a little primping to get it right. I agree about the red under the hood. Needs chr…

Comment by Billy Clanton January 2006 permalink
What makes a rat rod.
Howdy I. too, would like a link to the "LaBuds" site. I have been told they are the ones, but can't find them Billy

Comment by Billy Clanton January 2006 permalink
GM colors
Howdy I am gonna paint my '50 Chevy dash red & white, and need to know what the name of the color was for the 55 Chevy that was red & white. It wasnt a bright red but more of an orangish red and a cream or off-white. I bought a �…

Comment by Billy Clanton January 2006 permalink
Post war 1950 Chevy
Howdy And, thanks for the response. Since I posted this, I have acquired a Muncie 4 speed and 350 from a '69 Corvette. Actually, I think the rear end is from a '55. We should have it under the car by the first of the month, if the …

Comment by Billy Clanton January 2006 permalink
What makes a rat rod.
Howdy Yep, y'all are right on track as to what I was gonna build mine like. The Model T coil and plug is the way we did it too. You gotta have that high volt output to the plug. As to answering the original question, I believe that you …

Comment by Billy Clanton January 2006 permalink

More Comments

ClassicCar

Howdy, Stranger!

About

Billy Clanton

We'd love to hear from you! info@classiccar.com