Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: Cosmo@avaloncity.com
Joined: -
Visits: 0
Last Active: July 2011
Roles: Expert Adviser
Posts: 141

Cosmo@avaloncity.com

Horn Button Parts Needed
We have one on our store site. http://store.avaloncity.com/ check it out.

Comment by Cosmo@avaloncity.com June 2008 permalink
51 hornet fender skirts
We have a set on our site for sale. http://store.avaloncity.com/product_info.php?products_id=222

Comment by Cosmo@avaloncity.com September 2007 permalink
K-gap closure for Nationals
Master Marketers!! Great way to get them all to read the posting about the time off for the nationals. Good Job Danny and Kaylene. You and the family have a great time. Try not to buy too many more Hudsons on this trip.

Comment by Cosmo@avaloncity.com June 2007 permalink
Grille restoration
I have had great success with Frank DeGuire of Triangle plating. He is an older guy that has been doing this a long time. He is in St. Louis. You can see some of my potmetal hudson parts he did on his website. Before and After. http://www.trian…

Comment by Cosmo@avaloncity.com June 2007 permalink
36 coupe New Frame or Fatman clip
Latest update. I just spoke with the the folks where it is. There is a Dokota 92 (supose to match right up. for a v 6) frame that goes with it. discs etc. A little surface rust. (pics to follow next week). My transporter sold his 2 vechicle trans…

Comment by Cosmo@avaloncity.com June 2007 permalink
36 coupe New Frame or Fatman clip
yes it is a mess. Engine may be junk. I am not counting on it being recoverable. But I will check it out. So with an new crossmember maybe I can put in a fatman or mustang II. If you look close to this picture below. You will see that the frame …

Comment by Cosmo@avaloncity.com June 2007 permalink
36 coupe New Frame or Fatman clip
Yes you can see the frame cut off at the pics I posted at... http://www.avaloncity.com/36terraplane/36t/36t.html Check them out. I have more comming and I hope the car will be here by the end of the month. I will most likely do a frame u…

Comment by Cosmo@avaloncity.com June 2007 permalink
36 coupe New Frame or Fatman clip
Well here are some pics. I also have a gallery at this site http://www.avaloncity.com/36terraplane/36t/36t.html take a look at the 36 before pictures.

Comment by Cosmo@avaloncity.com June 2007 permalink
36 coupe Serial #
Thsi doesn't jive with the other information I have. It seems I have been told the this grill is from the Hudson while the grill below is from the Terraplane. http://www.avaloncity.com/36terraplane/36t/terraplane.jpg with the angle bars …

Comment by Cosmo@avaloncity.com May 2007 permalink
new 40 coupe project (needs lots)
We have a few parts for your project. Take a look over at the HETparts sotre. http://store.avaloncity.com/advanced_search_result.php?sessId=EA5EEB74B897D54AE8E104A624439FFC&keywords=40&x=0&y=0&search_in_description=1 Lens, glo…

Comment by Cosmo@avaloncity.com May 2007 permalink
Website help
Hi: I am cosmo. I do this for a living. I did the k-gap site and many others. HETparts store etc. I own a 47 truck and just bought a 36 coupe Here is a link to my hosting site I own and many sites I have done. http://www.avaloncity.com…

Comment by Cosmo@avaloncity.com May 2007 permalink
54 Hudson Italia on the blocks
Rumor has it. This was pulled from the auction. I spoke with Hyman about it today. Not surprised.

Comment by Cosmo@avaloncity.com May 2007 permalink
White Triangle Trucking - Going Dark Also -
I own my own servers. I am sure I can host your site if you want. Just give me a call and we can work it out. Drop me a line.

Comment by Cosmo@avaloncity.com December 2006 permalink
55 hUDSON pARK LIGHT ASSYS
yes. Please call or tell me when to. 352-364-4023

Comment by Cosmo@avaloncity.com December 2006 permalink
Drill out pits in chrome?
No Frank Doesn't use that process. He uses the standard triple chrome. Copper Nickle chrome. But it is in the prep that it is different. The part is beadblsted or cleaned. Then filled with a nonshrinking high quality epoxy based filler. Ne…

Comment by Cosmo@avaloncity.com December 2006 permalink
Drill out pits in chrome?
I have had great results with Frank from Triangle Plating You can see several of my hudson parts he did with the fill and chrome method. http://www.triangleplating.com/main.htm Give him a call. Mention the Hudson club he will treat you gre…

Comment by Cosmo@avaloncity.com December 2006 permalink
47 Hudson pickup for sale 90% done
I added a photo gallery of most of the Chrome parts and the K-gap parts. Check it out. If you are interested in the truck send me an email. Cosmo - 352-637-0038 http://www.hetparts.com/47pickup.htm cosmo@avaloncity.com

Comment by Cosmo@avaloncity.com November 2006 permalink
chrome plating
No a special paint is first applied by the chromer that will allow the copper to adhere. I am sorry I didn't do that step. Frank the Chormer did.

Comment by Cosmo@avaloncity.com November 2006 permalink
chrome plating
As I mentioned ealier - Frank at Triangle Plating is a wizard with Pot Metal. I have been working with him for over a year and he can do wonders with the worst parts. See my eairler post for more information. http://www.triangleplating.com/m…

Comment by Cosmo@avaloncity.com November 2006 permalink
chrome plating
I bead blasted the parts. Then I filled them. Sprayed with high quailty sandable primer. This process was a learning experence. To maintain the detail. The fender lights were tough to keep the detail. I haven't photographed the lights that he…

Comment by Cosmo@avaloncity.com November 2006 permalink
chrome plating
I have been working with Triangle plating in St.Louis. This old guy is a genius with Die Cast. I have done over 20 parts with him over the last year for my 47 Truck. He has perfected a process that I prep and fill the surface with high grade expo…

Comment by Cosmo@avaloncity.com November 2006 permalink
New Hudson owner needs parts
We have over 20 parts for you car on our online store. Several are NOS. Let me know if I can be of any help. store.avaloncity.com

Comment by Cosmo@avaloncity.com November 2006 permalink
Vacuum Wipers - source for a vacuum pump?
we have a few NOS wiper motors on our store. check and see if they can be of any use to you.

Comment by Cosmo@avaloncity.com September 2006 permalink
Become a Hudson Parts Dealer
Time to through in our 2 cents. If you don't know we own about 300 NOS and other parts and sell them on the HETparts.com store. So here is our experience in a nutshell. First off it cost us a couple of grand to get it. I had a friend spe…

Comment by Cosmo@avaloncity.com September 2006 permalink
1932 Hudson Coupe Hot Rod Forsale
This is what we call a OMFG. OhMyF***God car. I am working on buying a 36 that has a blower in it. My wife really wants the blower but I told her we don't own a gas station. What is the gas milage on a 350 with a blower? She is not going …

Comment by Cosmo@avaloncity.com August 2006 permalink
Virtual tour of the Twin H ranch? request for Bill Albright....
could you add our Hudson parts store to your page. I couldn't find an email link on it and the links on the forum aren't working. thanks Mike Cosmo Hetparts.com Store.avaloncity.com Partsguy@hetparts.com

Comment by Cosmo@avaloncity.com August 2006 permalink
parts
We have a few light switchs on the hudson parts store. check to see if we have the one you need. store.avaloncity.com

Comment by Cosmo@avaloncity.com August 2006 permalink
50 Super 6 rear skirts needed
We have a pair on the Hudson Store. "48-53 Step-down Fender Skirts -Condition VG -Serial Number unknown" $75 store.avaloncity.com

Comment by Cosmo@avaloncity.com August 2006 permalink
Updating Late 30's Hudson Headlights?
We have a few Head Light Lens on our store for some of the 30's models. I know you are talking about bulbs but I hate to see these lens sit around when there are folks who need them. http://store.avaloncity.com/index.php?cPath=1_4 there a…

Comment by Cosmo@avaloncity.com July 2006 permalink
elc. windshield wipers
For those of you looking for the link or contact info for RJ's etc here it is. http://www.rjays.com/Newport/Newport-01.htm Dan remember most of these guys are novice internet users and need all the links they can get. And when is that …

Comment by Cosmo@avaloncity.com July 2006 permalink

More Comments

ClassicCar

Howdy, Stranger!

About

Cosmo@avaloncity.com

We'd love to hear from you! info@classiccar.com