Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: Glen
Joined: -
Visits: 0
Last Active: June 2011
Roles: Senior Contributor
Posts: 69

Glen

Rarest HUDSON? that was built for production?
Every time I tell my wife about the rare car I want to bring home. She reminds me that some things are rare because they were ugly or no one liked or bought them. After being married for so many years and looking at so many different cars for a long…

Comment by Glen October 2010 permalink
I need a step down 2dr front seat.
I've gotten 2 replies on a seat and one on steering wheels on private messages, but I am having problems getting back to get a price and condition on the one seat and steering wheels. Also need location. Please email me at glenreeves@a…

Comment by Glen June 2010 permalink
Converting to Disc Brakes using Lincoln Town Car Rear Setup
Before you buy, please look at Speedway Motors web site or catalog. They have been doing race cars and hot rods for years. I know there rear kits work well and they may have or tell you what you need. Also Fatman Fabrication that make front e…

Comment by Glen June 2010 permalink
wiring problem
Thanks guys, I have the old motors manual and that is where I finally found the wiring for the 6 pole relay switch, but I really appreciate the offer. What I have is a ground switch on the passenger side rear of transmission, it runs to an…

Comment by Glen June 2010 permalink
3.51 diff for terraplane wanted
I changed mine to the 3.5 and am fairly happy. They are from a gentleman in CA and are used in the Railtons. I think they are actualy for another brand rear, because of some of the fitting you have to do. They are over $800 now. If Jim could figu…

Comment by Glen June 2010 permalink
Most Missed IT, Homecoming was GREAT!!!!
Just found the parade on Flickr. Site: Hudson Automobile Homecoming, Shipshewana, Indiana - a set on Flickr http://www.flickr.com/photos/dave_cornwell/sets/72157623942795223/

Comment by Glen May 2010 permalink
Most Missed IT, Homecoming was GREAT!!!!
More photos!!!!!!!!

Comment by Glen May 2010 permalink
Most Missed IT, Homecoming was GREAT!!!!
More photos

Comment by Glen May 2010 permalink
Same old Block Number question?
Thanks, Walt I know of the advantages of the hard block as far as ring wear, but are there advantages to the 55 or 56 block. Or should I say which is the better engine? Glen

Comment by Glen January 2010 permalink
Same old Block Number question?
Found another old block id problem that was disscussed some time ago and they mentioned the casting numbers. I know where to find these for a Chevy, but not the hudson. Here they are starting from the top where the top ones have a screw head cast…

Comment by Glen January 2010 permalink
'35 2-door Terraplane on Ebay
3 shots without the gun!!!!!!!

Comment by Glen December 2009 permalink
'35 2-door Terraplane on Ebay
I went and looked at it a couple of months ago and made an offer of about 1/2 of what it is bringing. It is pretty rust free, not the original paint or interior and would make a cute driver, but to be real nice most chrome, body work and interior ne…

Comment by Glen December 2009 permalink
What is it worth 35 Terraplane 4 door?
If you want to see the other end of the price. This is a 35 I spent 10 years building and some times if there are over 300 left maybe they should be street rods. I built it to drive and I did then had some guy chase me until I sold. This is the seco…

Comment by Glen September 2009 permalink
Need a 34 to 38 rear pig
Thanks Bud, be there next week

Comment by Glen August 2009 permalink
1949 Hudson Pickup Prototype Video
I wish it was, or mine was as finished. Mine's the old red and primered one he had, it was either done by a body company or a skilled sheet metal man. the one Sonny has did come from the factory as far as Charles and his memories can provide us…

Comment by Glen August 2009 permalink
1949 Hudson Pickup Prototype Video
It's the same truck and it was the one Charles Ruvolo owned in the Detroit area and according to him when talking to him last year, it did come from the factory. It may or may not be the only one built on the factory property. Last year he was …

Comment by Glen August 2009 permalink
35 terraplane
I think 34 and 35 were both fit with the same top. I believe Briggs body converted both year coupes into convertables. At the same time they chopped the top 3" to make them look lower and longer. I wish I new about 5 years ago when I had mine l…

Comment by Glen August 2009 permalink
are we turning into the "stepdown" club?
I have to agree there is a step down attitude and if modified blinders go on if it's a 308 twin H !! Didn't know there was a driven award, opps, my Terraplane is modified that my wife drove to the nationals through all the rain storms from…

Comment by Glen July 2009 permalink
34 Coupe Progress
Yes, and catch a lot of grief, but haven't seen any of the complainers cars I would trade for without them adding some cash.

Comment by Glen July 2009 permalink
Centennial Photos
Great photos! Even got some good ones of my two 34 Terraplanes and thanks for the nice coments. I always know when they come from someone who knows how hard it is to take something bad and mke it nice and keep it that way! If you know how to touc…

Comment by Glen July 2009 permalink
100 Years of Hudson Motor Cars
Some of the music wasn't to bad either!

Comment by Glen July 2009 permalink
34 Coupe Progress
Looks great, would be interested in your windows if they are the ones with the wing vents that go up and down. I would need all the mechanism too. the rag tops on the originals were chopped 3 inches at Briggs Body. I have 2 34s and was lucky to g…

Comment by Glen July 2009 permalink
wanted hudson street rod
I'm not sure what you are looking for because a street rod is built the way the builder thinks his car should be or wants it to be. So to by a nice done one you just need to take your time and look for all the things that you like about what is…

Comment by Glen February 2009 permalink
need hudson idea's for hudson hot rod
Is it a full fender 33 Hudson or 33 Teraplane highboy? I'd love to see a picture of it.

Comment by Glen February 2009 permalink
Hudson Deaer Information
The diagram of the light wireing in my photos and the box can go to a safe place for tech info or Hudson History. When I get back home I would be happy to send every thing but the lights to who ever will preserve them for the use of all. All I need …

Comment by Glen February 2009 permalink
Hudson Truck bed or older bed wanted wtb
what year?

Comment by Glen February 2009 permalink
Snow Photos Wanted!
More snow and more photos. I'm headed south Monday and hope to see all at the Orange Blossom meet. The old truck does better on the ice than my late model. About time to give her a wash at Jim's.

Comment by Glen February 2009 permalink
Snow Photos Wanted!
Merry Christmas and a little snow!!!!!!

Comment by Glen December 2008 permalink
34 "T" grill for sale
I have one that is damaged, but could be fixed. Most of the ones from around here are very rusted on the bottom this one came from out west and is still very solid and fixable. I hate to say I have $400.00 in it, but at the time wanted it for a spar…

Comment by Glen November 2008 permalink
I Need A 34 Terraplsne Grill
I have an extra one that I bought on e-bay a few years ago. It's pretty solid with one bullet hole and bent back some where some one must have pushed or hit something. I think I have about $400 in it, but at the time I was wanting a spare. I ha…

Comment by Glen October 2008 permalink

More Comments

ClassicCar

Howdy, Stranger!

About

Glen

We'd love to hear from you! info@classiccar.com