Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,058
- Orphaned Marques
- ↳ Hudson21,124
- ↳ Street Rods801
- ↳ Off Topic559
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash71
- ↳ Packard163
- ↳ Studebaker121
- Classic American Cars
- ↳ Ford Motor Company959
- ↳ Chrysler Corporation478
- ↳ GM Corporation1,394
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,961
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- MikeKy55 March 2007
- Phillfam99 March 2007
My Buddies 72 C10 Knocking Noise
-
My Buddy has a 72 C10. 350 w/th350.
He started it up the other day and heard a loud pop. After opening the hood he noticed small spurts of flames shooting out of the passenger side exhaust headers. After replacing the header gaskets, flames went away, he then heard a noise which he thought was the passenger side valve cover gasket being busted. When I arrived, he cranked it up and It definatly sounded like a knocking sound from the passenger bank. We pulled the passenger valve cover off and he cranked it up and all the rocker arms and push rods seemed to be working fine. We are going to do a compression check on it today. Is there any thing else we could be looking for. I dont think it could be a hydraulic lifter. Do you guys have any ideas? -
Gary, if he remembers which exhaust port the flame was coming from, with the valve cover off, loosen the rockers on that cylinder one at a time keeping track of how many turns it was loosened so you can put it back. See if the valve stem comes up higher than the other valves (while in the closed position). If so, he may have broken a valve. Also, is the engine misfiring?
-
Sir,
His engine is not misfiring. -
Gary, did you learn anything more on the truck? WETSUS
-
Nope, he hasnt taken it in to the shop yet. I will let you know when we find out.
