Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,062
- Orphaned Marques
- ↳ Hudson21,132
- ↳ Street Rods807
- ↳ Off Topic574
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,959
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
1947 Hudson Super Six.
-
G'Day , Can anyone help with a set of locks and keys to suit a 1947 Hudson Super six, that is two sets one for each side, these are for a guy overseas and is in need of same, he also is looking for a 501S carburetor to suit the same vehicle.
Any help would be much appreciated. -
Huddy, have you checked with Al Safrahn? He's had many '41-'47 parts cars.
-
I found some in the past at a local HotRod shop that were universal and almost Identical. Shaft too long but fit just like original. Might check your local HotRod place down there,
RogerRetired Tech. -
Thanks Park, have not checked with Al will check him out.
Thanks for your suggestions to Tallent R -
Huddy42
Here is a ebay ad for locks with keys.
Lee O'Dell
http://www.ebay.com/itm/1939-1940-1941-1942-1946-1947-Hudson-Door-Lock-Key-NOS-/200875698713?hash=item2ec51fea19&item=200875698713&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr -
Thanks Lee, checking with the seller, add says he had three with one sold, so see what happens. thanks for the message.
-
Huddy42, you are welcome. I bought a pair from this ad a couple months ago for my PUs that were missing locks. I believe there were 10 locks available at that time. I was excited when I first saw the ad. For years it seemed I was always one step behind someone else buying a lock, and none had any keys. Good luck.
Lee O'Dell -
If you have a good lock a real locksmith can make keys for it . About the same price as the one on Ebay probably
RogerRetired Tech. -
I had a local locksmith make keys for my 47 at $5 ea. He also came to my house and made a key for my 33 locking gas cap, charged a bit more for that though. He was there an hour (it was rusted on), and charged $40. Works great now though...
-
yeah , the price will vary of course .You just cant go to a regular key grinder in a hardware store,
RogerRetired Tech. -
When the locksmith came to the house to make one ignition key for my PU it cost $65. The door lock was missing at the time. Now I have a door lock and key for both trucks. I'm a happy camper. That reminds me, my Dads 46 had a camper shell. Don't know if I want to go that route.
Lee O'Dell -
Thanks for your info Lee, have ordered two sets for our mate overseas.
