Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

In this Discussion

Hudson Hood Emblem Wire Clip Locations
  • commodorecollectorcommodorecollector
    Posts: 271Hitchhiker
    Hi,
    Could someone please post a picture of a 1949 Hudson hood (1948-1950 should work too I assume since the design did not change) showing the inside and the location of the clips. I would like to have it as reference since, one of mine came off when I was removing the emblem and I do not know its proper location.
    Thanks,
    Chris
    Christopher
    Wyotech Sacramento Grad 2013
    - Collision and Refinishing
    -Applied Service Management

    Own:
    1954 Hudson Hornet Sedan //1949 Hudson Commodore 6 Sedan // 1949 Hudson Super 6 Sedan // 1941 Hudson Super 6 Sedan
    Wanted:
    1949 Hudson Commodore 6 Club Coupe // 1949 Hudson Super 6 Brougham // 1950 Hudson Super 6 Brougham
    All Stepdown Coupes and Broughams
    1937 Brougham, Victoria Coupe, Utility Coupe, and Sedan (all models acceptable)
    1936 Coupe
  • Tallent RTallent R
    Posts: 1,568Platinum Member
    I'm not sure I understand what cilp's you mean. The 48-49 had a die cast ornament that mounted with bolts treaded in from the bottom. No clips ,just bolt and lock washer ,I can post a photo if you like but thats what it will show,
    Roger
    Retired Tech.
  • commodorecollectorcommodorecollector
    Posts: 271Hitchhiker
    image
    I am referring to this emblem on the front of the hood, and the wires running to the the light behind the emblem held up against the hood using clips/tabs.
    Christopher
    Wyotech Sacramento Grad 2013
    - Collision and Refinishing
    -Applied Service Management

    Own:
    1954 Hudson Hornet Sedan //1949 Hudson Commodore 6 Sedan // 1949 Hudson Super 6 Sedan // 1941 Hudson Super 6 Sedan
    Wanted:
    1949 Hudson Commodore 6 Club Coupe // 1949 Hudson Super 6 Brougham // 1950 Hudson Super 6 Brougham
    All Stepdown Coupes and Broughams
    1937 Brougham, Victoria Coupe, Utility Coupe, and Sedan (all models acceptable)
    1936 Coupe
  • Tallent RTallent R
    Posts: 1,568Platinum Member
    Ok , Sorry . I know what you mean now . However that is also bolted it , wire runs down the drivers side of hood lip to cowl. I can get some photos for you tommorow,
    Roger
    Retired Tech.
  • commodorecollectorcommodorecollector
    Posts: 271Hitchhiker
    Awesome! Thank you Roger! :D
    Christopher
    Wyotech Sacramento Grad 2013
    - Collision and Refinishing
    -Applied Service Management

    Own:
    1954 Hudson Hornet Sedan //1949 Hudson Commodore 6 Sedan // 1949 Hudson Super 6 Sedan // 1941 Hudson Super 6 Sedan
    Wanted:
    1949 Hudson Commodore 6 Club Coupe // 1949 Hudson Super 6 Brougham // 1950 Hudson Super 6 Brougham
    All Stepdown Coupes and Broughams
    1937 Brougham, Victoria Coupe, Utility Coupe, and Sedan (all models acceptable)
    1936 Coupe
  • Tallent RTallent R
    Posts: 1,568Platinum Member
    No problem - got a 1950 in the shop right now with the hood up,
    Roger
    Retired Tech.
  • Tallent RTallent R
    Posts: 1,568Platinum Member
    Well here is a 1950 underside of the hood -back side of the area in question. Also the path the wire folows to the firewall. Hope this helps you in your resto,
    Roger
    ebay items 1-1-2013 001 (1280x960).jpg
    1280 x 960 - 184K
    ebay items 1-1-2013 002 (1280x960).jpg
    1280 x 960 - 162K
    ebay items 1-1-2013 003 (1280x960).jpg
    1280 x 960 - 166K
    ebay items 1-1-2013 004 (1280x960).jpg
    1280 x 960 - 262K
    ebay items 1-1-2013 004 (1280x960).jpg
    1280 x 960 - 262K
    ebay items 1-1-2013 005 (1280x960).jpg
    1280 x 960 - 224K
    ebay items 1-1-2013 006 (1280x960).jpg
    1280 x 960 - 261K
    ebay items 1-1-2013 007 (1280x960) (2).jpg
    1280 x 960 - 265K
    ebay items 1-1-2013 007 (1280x960).jpg
    1280 x 960 - 265K
    Retired Tech.