Find A Classic Car
Thousands of listings here >>
sell your classic car
FREE to list - Online until sold

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Categories

In this Discussion

Parts for 33
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Looking for the hood side chrome pieces for 33 8 cylinder also horns, fender marker light, and mascot. Thanks John 314 922 0041 email jkclifford@att.net
  • faustmbfaustmb
    Posts: 1,116Platinum Member
    Paul Schuster had a set of Horns at the National, I've seen Mascots on eBay pretty regularly.
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Come on anybody ? No wonder it takes years to restore a ride, makes you want to make a traditional hot rod.
  • Tallent RTallent R
    Posts: 1,602Platinum Member
    There are not a lot of 33's around ,try looking in the WTN ads ?
    Roger
    Retired Tech.
  • bent metalbent metal
    Posts: 1,356Platinum Member
    Your not getting much response because your asking for some of the hardest to find and most rare pieces out there. :)
  • Tallent RTallent R
    Posts: 1,602Platinum Member
    Very true ,Want a fender for a stepdown hudson ? I got a trailer full for ya but not much of anything that old. Dont give up yet ,like I said try placing an ad in the WTN and see what turns up,
    Roger
    Retired Tech.
  • FRMOTORSYMAILCOM
    Posts: 1Hitchhiker
    I have had several people reference me to PartingOut.com for parts. I haven't found the parts I am needing on a search yet but I created a Parts Wanted Listing (pretty cool its like creating a billboard for the parts you need) and I actually had a guy notify me he had the chrome for the hood of my riviera. So I found one of the three parts I'm looking for there. I hope the other two come up soon but I'm not in any big rush. I think the site is pretty new but could be a good way for you to get the parts you need too .... it doesn't cost anything so its not a risk just another way to tell people what you need and hope the right eye balls see it.

    Good luck
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Thanks for the info, I know there are few and far between 33 cars and or parts but I would lay money that some people have hoards of stuff or doubles of stuff they don't want to part with. Just makes bringing back to life a old ride that much more difficult, I'm not in a big rush but I don't want to take 10 years to complete.
  • BrowniepetersenBrowniepetersen
    Posts: 2,398Platinum Member
    Been there, done that. It took me just over 18 months to find enough 1932 Essex hub caps to finish off my car. It does make one feel good to find those rare items and get them on the car.
    Brownie
  • 35terraplane35terraplane
    Posts: 16Hitchhiker
    Contact Cecil Nuxoll, 934 W. 16th, Spokane, WA 99203 (509) 838-1735 He makes horns for Hudsons of the 30's. He made mine for my 35T. He is old and his son-in-law may be doing the work now. They are custom made, 6V or 12V, etc. and costly. They are beautiful, correct and work
  • Jon BJon B
    Posts: 4,796Moderator
    However, I don't believe Nuxoll furnishes the specific bracket one would need to mount the horns. Since that bracket would probably be peculiar to the Terraplane alone (and since 1933 is such an "off year" for virtually every make of car) you may find that the bracket's way harder to find than the horns themselves. However, someone in the Club may have undertaken to repro these items.

    When looking for these 1933 parts, don't neglect putting an ad in the WTN, since it's read by many more Hudson people than this forum is. You might also try contacting Carl Weber, who buys and sells a lot of the older Hudson parts and might at least have some idea of what the parts look like (and what other kinds of cars might have similar ones that are easier to obtain).
  • faustmbfaustmb
    Posts: 1,116Platinum Member
    From what I recall, the horn brackets could be easily made out of flat sheet metal. I can provide patterns if it is helpful.
  • 5433HET5433HET
    Posts: 171Expert Adviser
    I thoought the headlight stands were unique to external horn cars, in that they had a tapped hole for the bracket? Does anyone here have a '33 with the external horns that could post a close up pic? Thanks!
  • essexcoupe3131essexcoupe3131
    Posts: 1,224Platinum Member
    see new thread for the mascot
    Mike
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Thanks Mike will see how hi the bidding will be.
  • ra4jumbra4jumb
    Posts: 82Hitchhiker
    My Uncle had the chrome pieces for the sides of the hood cast by somebody, I do not know if he has more sets or if more could be made, he is on here (Tom Brintnall) you may want to check with him. I will ask him about it too. I think I have at least one fender light and possibly a shell but they are not complete.
  • faustmbfaustmb
    Posts: 1,116Platinum Member
    I have one spare taillight base, just the cast part. PM me
  • essexcoupe3131essexcoupe3131
    Posts: 1,224Platinum Member
    here are your horns if add is correct
    but the price look good though
    i thought they had a different center in the trumpet but someone will correct me
    thought it was linear rather than a mesh

    http://www.ebay.com/itm/1933-35-HUDSON-HORNS-BRACKETS-VERY-NICE-/290814718381?hash=item43b5e871ad&item=290814718381&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr

    mike
  • ra4jumbra4jumb
    Posts: 82Hitchhiker
    They should have mesh I believe and the brackets are either wrong or not complete.
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Also looking for front and rear bumpers.
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Bump?
  • oldhudsonsoldhudsons
    Posts: 1,752Platinum Member
    the headlamp to fender mount is tapped to received 2 screws from the horn bracket on the '33 Terraplanes that came with exterior front horns which were only on the Deluxe models built after August of '33 - not sure about the '33 Hudsons.
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Bump
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Bump up
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Bumpity bump still looking
  • oldridesoldrides
    Posts: 12Hitchhiker
    Another guy looking for hard to find 33 Terraplane parts.....coupe rear fenders (assume different than sedan ??) and mascot. BUT, a reproduction Mascot is available repo out of cast stainless steel....Thanks Ken
  • ra4jumbra4jumb
    Posts: 82Hitchhiker
    Those fenders are different than sedan.
  • essexcoupe3131essexcoupe3131
    Posts: 1,224Platinum Member
    maybe worth getting to the Harmon estate you never know what could be there
    or someone may know if he had any early tin
  • oldridesoldrides
    Posts: 12Hitchhiker
    Figured coupes were different.....prob will need to get real creative with mine. Bad damage and very rusty. Thanks
  • oldhudsonsoldhudsons
    Posts: 1,752Platinum Member
    Jim had several of the extremely rare radios that were std. equip. on the Deluxe '33 Ts; he sold me one, about the only thing I was ever able to pry out of him, LOL.
  • 5433HET5433HET
    Posts: 171Expert Adviser
    Being that the rear fenders are almost impossible to find, does anyone have thoughts on the feasibility of having new ones made? There are plenty of good fabricators out there with the skills and machines.I'm thinking of people like Fay Butler.
  • essexcoupe3131essexcoupe3131
    Posts: 1,224Platinum Member
    Are the rear guards wider like the earlier coupes or just a different shape
    I know the 31s coupes are wider than the sedans
    A radio now there's a thought for you John
    if you can't go maybe someone would acquire for you, but you may have to dig deep
    but you never know your luck

    Mike
  • ra4jumbra4jumb
    Posts: 82Hitchhiker
    The area where the fender bolts to the body is different , the front and tail are the same just the mid area width and bolting area is different.
  • bent metalbent metal
    Posts: 1,356Platinum Member
    Why don't you get ahold of someone and get an estimate? How many people need rear fenders?
  • oldridesoldrides
    Posts: 12Hitchhiker
    I dont know who Fay Butler is. If someone has his contact info, great, let me know. Or go ahead and contact him if you know him. Thanks
  • 5433HET5433HET
    Posts: 171Expert Adviser
    I will check into this and report back.
    I am currently having a new windshield being made for my '33, and I will also post my comments on that.
  • oldridesoldrides
    Posts: 12Hitchhiker
    Great! It will be interesting how many people need rear fenders.....I have a set of sedans, but in a way hate to rob and modify those. They are better than the coupes, but still not great. I let my white triangle membership lapse, but a post in the newsletter/wedsite obviously good idea. If this idea progresses, I would put a fixed bid auction on ebay, requesting input.
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Bump
  • oldridesoldrides
    Posts: 12Hitchhiker
    Bump?
  • ra4jumbra4jumb
    Posts: 82Hitchhiker
    I need at least a DR rear but if a pair had to be purchased I would.
  • faustmbfaustmb
    Posts: 1,116Platinum Member
    33kc1989-

    Mascot just listed on the HETclub.org forums. Looks pretty decent
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Thanks just e mailed him
  • oldridesoldrides
    Posts: 12Hitchhiker
    If you do not want the Mascot, or decide to sell if you buy, I am missing mine.... please let me know and email me his info.....I let my HET lapse and haven't rejoined...thanks! burnflatham@aol.com
  • ivanz62
    Posts: 171Expert Adviser
    Where is this mascot listed?
  • ESSX28-1ESSX28-1
    Posts: 998Platinum Member
    Pictures -
    33 ET Mascot.bmp
    640 x 480 - 900K
    33 ET Mascot.bmp
    640 x 480 - 900K
    33 ET Mascot.jpg.bmp
    640 x 480 - 900K
    33 ET Mascot.jpg.bmp
    640 x 480 - 900K
    Dave Y
    New Zealand
  • ESSX28-1ESSX28-1
    Posts: 998Platinum Member
    From HET Club Forum

    I want to sell,
    · Original hood mascot from a 1933 Essex Terraplane
    · Ornament is in good original condition
    · Mascot is unbroken and is without cracks or bends
    · Mounting studs are intact
    · Part number 101946 is cast on underside of base
    · A great addition to your mascot collection
    · Nice unbroken example for a vintage Terraplane restoration project

    Send me an e-mail with what you would give please! gerritclazien@gmail.com
    Sorry but my english is not so good on paper.

    with regreats:
    g.j.stoltenkamp
    loolaan 86
    3971pp driebergen-rijsenburg
    utrecht- the netherlands

    tel: 06-55898794


    33 ET Mascot.jpg.jpg
    640 x 480 - 43K
    Dave Y
    New Zealand
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Back to top
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Bttt
  • 33kc198933kc1989
    Posts: 57Hitchhiker
    Back to top
  • bent metalbent metal
    Posts: 1,356Platinum Member
    How much would a set of coupe/convertible rear fenders be worth? I've never seen or even heard of any for sale.

    Anyone have a number in mind?
  • essexcoupe3131essexcoupe3131
    Posts: 1,224Platinum Member
    here a posting David put up for the fender light
    http://www.ebay.com/itm/RARE-ORIGINAL-1933-TERRAPLANE-SIX-FENDER-PARKING-LIGHT-/380592768252?pt=Motors_Car_Truck_Parts_Accessories&hash=item589d18c4fc

    Mike
Add a Comment
ClassicCar

Thousands of Classic Cars for Sale - Free to List.

Since 1996 we're been the place to go to for all things Classic Car. Classifieds, news, events, community and so much more. No clutter. No hassles. Just Classic Cars.

We'd love to hear from you! info@classiccar.com

Copyright 2011-2013 Classic Car
All rights reserved.

We accept no responsibility for inaccuracies. All trademarks acknowledged.