Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,068
- Orphaned Marques
- ↳ Hudson21,136
- ↳ Street Rods807
- ↳ Off Topic574
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,961
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- mars55 October 2012
- PAULARGETYPE October 2012
hudson jet oil filter
-
The jet oil canister came with a NAPA 1070 oil filter. NAPA says the # 1010 will replace the 1070. The problem with the # 1010 filter is the holes are too small to fit over the stand pipe in the canister. I need to know where I can buy the correct filter replkacement for my jet oil filter canister.. Bill K
-
BILL TAKE THE OIL FILTER OFF IT ONLY FILTERS ABOUT 1/3 OF THE OIL THE PUMP PUTS OUT AND IF ONE OF THE OIL FILTER LINES EVER BRAKE OR LEAK WHEN YOUR ON THE ROAD YOU CAN SAY GOODBYE TO YOUR ENGINE JUST CHANGE THE OIL EVERY 1,000 MILES THE OIL WE USE TODAY IS FAR SUPERIOR TO WHAT WAS SOLD WHEN YOUR JET WAS NEW THIS WHAT I HAVE DONE FOR THE LAST 20 YEARS I DID HAVE A FILTER ON MY 57 HOLLYWOOD AND I HAD A LINE BLOW IT COST ME A ENGINE TAKE
HUDSONLY
PAULARGETYPE -
What size is your stand pipe?
