Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

In this Discussion

Splasher Rods?
  • OttobethereOttobethere
    Posts: 92Senior Contributor
    I need a little help. I'm looking for NOS splasher rods for the 212 6 cylinder engine. The part number is 157369. I know I can have someone re babbit them but if I can avoid the cost and the amount of time involved all the better. PM me if you have a lead. No luck with Dale Cooper he only had two. Thanks!
  • Marconi
    Posts: 549Platinum Member
    Try Jason @ Vintage Coach. 8am till 5pm Tues. to Sat. 909-823-9168
  • 41 hud
    Posts: 157Expert Adviser
    I may have some rods for your splasher engine. I bought some extra rods a while ago. Since i got another 212 for my 41 running I have extra parts. If interested I'll check the numbers. Jim
  • 41 hud
    Posts: 157Expert Adviser
    Tried to send you a pm to no avail. Jim
  • OttobethereOttobethere
    Posts: 92Senior Contributor
    I would be interested Jim. Thanks!
  • Geoff C., N.Z.Geoff C., N.Z.
    Posts: 2,267Platinum Member
    What size do you need? Your number is incorrect, the numbers are 157363 and 157364 for the 5" stroke motor
    If you're stuck in a hole, stop digging.
  • OttobethereOttobethere
    Posts: 92Senior Contributor
    I looked in the parts book and you are correct. The rods I pulled out of the engine are all 157369. 1,2 and 4 are right hand and 3,5 and 6 are left. They are all stamped 157369. I just purchased two rods from Dale Cooper and the rods he sent to me are also stamped 157369 they are left hand rods. Could it be some were finished, or semi finished? What I need is 3 right hand rods and 1 left hand rod. Thanks.
  • 41 hud
    Posts: 157Expert Adviser
    ottobethere, Ok, I have six rods and pistons 157369, if your interested. Jim
  • 41 hud
    Posts: 157Expert Adviser
    ottobethere Since this forum keeps flip flopping I'll give you my ph. no. [716] 826- 7087 JIm