ClassicCar

Trulyvintage

Hello from Tulsa, OK ....

It is snowing this morning but at least it is above 0 degrees

I am on the road most days, when I am not driving I spend

time on the internet.

I like Hudsons, chevys, mopars :cool:

Check out my You Tube Travel Channel with stories
from the road

@ http://www.youtube.com/user/TrulyVintageOnDaRoad?feature=mhum

Jim

RL Chilton

Good Morning, trulyvintage! It's amazing how many Hudson folks are also Mopar fans. Apparently you like Fords, as well. Nice '36! Stay warm and welcome to the forum!

Browniepetersen

Goodday trulyvintage. It is good to have you on the Forum. Nice 36! Looks to be in great condition. Nice Hudson as well. I expect it is a 49 Brougham? Looks to be a bit of work in this one. Is this your first Hudson? Would love to see some photo's of your other cars. I also have a thing for Chevrolets.

hudsontech

Welcome aboard!!! You'll find this forum to be real "people" friendly. You got problems - somebody will have the answer.

I'm one of the nut cases on this forum - I like Hudsons, Mopar and (sigh) Ramblers.

I have a lot of Hudson related material on my web site (the following address is temporary - the HET club VP/webmaster/guru/and all around good guy is putting together a more permanent site. For the moment

hetclub.org/burr will suffice.

Y'all have a good one, hear.

Hudsonly,

Alex Burr

HudsonTech

Memphis, TN

Hudsonrules

:)Welcome to the Forum, A great group of people that are very helpful and give encouragement when we get in a problem spot with our Hudson's. Yes, I like Hudson's along with mopars and International's and Ramblers. Actually, I like all older cars, be it Ford or Chevy or whatever. That Hudson looks like a real project, nice Ford roadster. Arnie in Nevada

Heart_Of_Texas

I suspect your post is showing your one of "your loads" and that you transport cars for a living? Is the Hudson in question the 2 door that was recently posted to Craigs List in Texas? Brougham Hudsons seem to be getting a lot of attention lately. Welcome... to the Hudson BBS.

Trulyvintage

Thanks to all who have welcomed me

Yes, I do custom transport.

I haul with my own equipment.

The Hudson you see pictured is a 1950 model

that belongs to Sean in Plymouth, Maine.

I shipped it for him last year from Portland, Oregon.

Jim

hudsontech

Trulyvintage wrote:

Thanks to all who have welcomed me

Yes, I do custom transport.

I haul with my own equipment.

The Hudson you see pictured is a 1950 model

that belongs to Sean in Plymouth, Maine.

I shipped it for him last year from Portland, Oregon.

Jim

Plymouth, Maine - I lived in (southern) Maine for near 70 years, afore I moved to Memphis, TN, and I'd never heard of Plymouth, Maine. I can see why - it's one of those small towns tucked into the middle of nowhere up by Bangor.

Hudsonly,

Alex Burr

Memphis, TN

Trulyvintage

I know what you mean ....

Driving all over the country I pass by areas

that I realize I drove by & never noticed

It seems like I hardly have the time

to stop when I want to ....

When I do have time I don't have the money :cool:

Jim

Sunset Classics

Some shameless self promotion here

I don't mind if this post gets deleted

If any of you guys need a Hudson hauled :cool:

I am available to transport on January 13th & 14th

from St. Louis, MO to Dallas, TX - up to 16 feet of room to transport

I will be driving thru Joplin, MO and Oklahoma City

From Dallas, TX I am available for vehicle transport to either

Atlanta, GA or South Bend, IL - up to 16 feet of room to ship

if I go to South Bend & 34 feet if I go to Atlanta.

Please call Jim today at (260) 804-6695 or PM me

I will call you back if I don't answer

Thanks!

Trulyvintage

Safe Labor Day Travels everyone

I am headed out of Fresno, CA thru Los Angeles, CA to

Phoenix & Tucson, AZ on September 6th ....

If anyone needs a running or rolling Hudson or other vehicle

hauled along my way - I have 20 feet of room

Jim

(260) 804-6695

Trulyvintage

If you need transport for your Hudson or other classic car ....

September 26th

34 feet of room available from Ligonier, PA to Cleveland, OH

September 27th

18 feet of room available from Cleveland, OH to Green Bay, WI

Please call Jim

(260) 804-6695

54SuperWasp

Welcome Jim, I am myself quite new in the family and you can be sure it is the best one on the net!

Trulyvintage

October 22nd

34 feet with 10,000 pound capacity available from
Telford zip 18969 & Coatesville zip 19320 - PA
to Mc Cune, KS zip 66753

Here is my route @ http://mapq.st/h/3-BjBOxumF

Then .....

18 feet with 6000 pound capacity available from
Mc Cune, KS zip 66753 to Reed City, MI zip 49677

Here is my route @ http://mapq.st/h/6-91FP

Jim
(260) 804-6695

Trulyvintage

54SuperWasp wrote:

Welcome Jim, I am myself quite new in the family and you can be sure it is the best one on the net!

Thanks

Jim

Trulyvintage

November 12th

17 feet of room available from Casper, WY 82604
to Reed City, MI 49677 with 5500 pound capacity

I can haul your Hudson or other classic car or truck
if it runs or rolls on good tires that hold air for
the trip and steers

Here is my route @ http://mapq.st/h/3-opQRD1bj

PM me or call me

Thanks!

Jim
(260) 804-6695

Trulyvintage

[attachment=8831]T34Dumpn30toro.jpg[/attachment]
December 8th

Vehicle transport available from Anacortes & Seattle, WA
and Portland, OR today

36 feet w/ 10,000 pound capacity to safely transport
your car or truck from Seattle, WA & Portland, OR
east to the Midwest or East Coast

I also can head down the west coast to San Jose, CA
and then west to Denver, CO

Or I can go to Phoenix, AZ

Safe daylight hauling at 55 m.p.h.

Soft ties to the axle or frame

Up to 100 inch wide tire width

No deposit required - you pay at drop off

On the road now solid since September 2009

Thanks!

Jim
(260) 804-6695

Ol racer

Jim,

By any chance will you be going by Souix City Iowa then back to Pa. anytime in the near future and able to haul a short Hudson pickup Bed? If so send me a PM...

Thanks

Trulyvintage

[attachment=9037]TDinerCorvette.jpg[/attachment]

Probably not

I do have room around December 27th for a vehicle
from Kansas to Idaho up to 17 feet long

Jim
(260) 804-6695

Trulyvintage

[attachment=9062]TJoeWagon.jpg[/attachment]
Merry Christmas

December 26th

17 feet of vehicle transport space available

Montrose, MO 64770 to Culdesac, ID 83524

My route @ http://mapq.st/gNOurj

Then

34 feet of vehicle transport space available

Culdesac, ID 83524 to Rochester, WA 98579

My route @ http://mapq.st/geBCLI

Then

17 feet of vehicle transport space available

Rochester, WA 98579 to Ballwin, MO 63021

My route @ http://mapq.st/fun8Gu

Thanks!

Jim
(260) 804-6695

Sunset Classics

Jim- I think I've posted about this before, but went back through this post and didn't find it.

There' an antique tractor board at www dot ytmag dot com- look on the left for "hauling board"- you can enter either "need hauled" or "available to haul". It has a pretty good readership, might help you line up some loads.

Interesting you're going to Rochester, WA- That's where I grew up. I live about 20 miles from there now- I sure didn't get far!.

Trulyvintage

For all those in the path of the 'historic blizzard' I sympathize with you .....

I am leaving Evanston, WY where it is well below zero with the wind chill and headed west along I-80 to warmer temperatures in California

If anyone needs hauling, I have about 20 feet of room to Oakland, CA

From Oakland, I have room for parts down to Los Angeles.

From Los Angeles, I am headed east again across the country to
Boston, MA - I have about 18 feet of room to haul a car :whistle:

Best way to get ahold of me is by phone
(260) 804-6695

hudnut52

WELCOME TRULYVINTAGE I,AM ALSO A HUDSON NUT AND A FORD NUT. I HAVE A 50 PACEMAKER COUPE AND 52 HORNET SEDAN. I WAS WONDERING IF YOU ARE GOING TO RESTORE THE 49 2DR SEDAN. I,AM LOOKING FOR DOORS FOR MY 50 PACEMAKER

Hudsonrules

I have a '49 Hudson broughm minus engine and transmission that needs a ride from Dayton, Nevada to Carson, California {near Long Beach} sometime.Any chance of a ride? no hurry. Thanks, Arnie

Trulyvintage

HI,

I'm in Wendover, NV
I could get that on this trip.
I need the overall length of the vehicle.
It would be best to call me or give me a number that I can reach you.
If we work out the details, it would be picked up in the next few days.

Thanks-

Jim
260-804-6695

Trulyvintage

Hudsonrules wrote:

I have a '49 Hudson broughm minus engine and transmission that needs a ride from Dayton, Nevada to Carson, California {near Long Beach} sometime.Any chance of a ride? no hurry. Thanks, Arnie

Arnie,

I have 20 feet of room available.
I sent you a message yesterday - no reply.

I am leaving Elko, NV this afternoon.
I am headed west to CA along I-80.
If you are serious about transport,
give me a call.

Jim
(260) 804-6695

Trulyvintage

January 8th

Leaving Paramount, CA this morning
Headed up to Menlo Park, CA

Then to Salem, OR

Room for a vehicle or parts

My route @ http://mapq.st/hKOMsY

Jim
(260) 804-6695

Jon B

No offense intended, but I'm going to move this thread to "Discussions", which is our place for all Forum messages not specifically Hudson-oriented. Car transport is a service that's very helpful for Hudson owners, but in general the "Hudson" board was intended for technical and historical issues, restoration tips or other Hudson-related matters.

denverslim

Hi Guy.
Bought a tractor (7500lbs) close to Omaha Ne. It needs a ride to my here in Denver. Any help?

Trulyvintage

Jon B wrote:

No offense intended, but I'm going to move this thread to "Discussions", which is our place for all Forum messages not specifically Hudson-oriented. Car transport is a service that's very helpful for Hudson owners, but in general the "Hudson" board was intended for technical and historical issues, restoration tips or other Hudson-related matters.

Jon,

Understood & appreciated

Jim

Trulyvintage

denverslim wrote:

Hi Guy.
Bought a tractor (7500lbs) close to Omaha Ne. It needs a ride to my here in Denver. Any help?

I just transported this Porsche tractor from Ohio to California

[attachment=9644]TPorschetractor.jpg[/attachment]

Visit our Antique Tractor Transport webpage:

@ http://www.trulyvintagetrailers.citymax.com/antiquetractortransport.html

You can send me an email w/ specifics,

Jim

Trulyvintage

Check out my video adventures from the road

@ http://www.youtube.com/user/TrulyVintageOnDaRoad?feature=mhum

Pictured below is a 1947 Cadillac Hearse I just dropped off
in Apple Valley, CA

[attachment=10224]T47Hearse1.jpg[/attachment]

April 25th

Vehicle transport

35 feet of room available from Rogers, MN 55374
to Southern, California

10,000 pound capacity

10K electric winch

Up to 100 inches wide

Loading ramps

Safe daylight driving at 55 m.p.h.

No deposit required - just your good word

On the road now solid since September 2009

Jim
(260) 804-6695

Hudson308

Huh. Any chance you're moving something for Ellingsons Car Museum? They're in Rogers. They've got a (rough) '49 Super 6 sedan for sale in the "corral", as well as a pretty nice '55 Wasp sedan.

Trulyvintage

Hudson308 wrote:

Huh. Any chance you're moving something for Ellingsons Car Museum? They're in Rogers. They've got a (rough) '49 Super 6 sedan for sale in the "corral", as well as a pretty nice '55 Wasp sedan.

No,

I am hauling a couple Moparts for a collector

Jim

Trulyvintage

April 23rd

In Worthington, MN 56187 today :whistle:

[attachment=10263]T66Roadrunner.jpg[/attachment]

I have 35 feet of available space on my open trailer for
safe classic vehicle transport to anywhere in the lower 48 states
w/ 10,000 pound capacity

No deposit required

Safe daylight driving at 55 m.p.h.

Jim
(260) 804-6695

Trulyvintage

April 26th

In North Platte, NE today ....
Transport available to most most major cities
in the lower 48 states

[attachment=10287]T1928Tudor.jpg[/attachment]

35 feet open trailer space
10,000 pound capacity
Up to 100 inches wide
Loading ramps
10K electric winch

No deposit required - just your good word

On the road now solid since September 2009

Jim
(260) 804-6695

Trulyvintage

In Lexington, Nebraska for a few days ...

Big thank you to Justin & his Dad Jay for the nice visit & cold beer

35 feet of vehicle transport space available from Central Nebraska
to Reno, NV or just about anywhere in the lower 48 states
if my trailer is full

10,000 pound capacity
Up to 100 inches wide
10K electric winch
Dexter E-Z Flex suspension absorbs up to
80% of road vibration
Safe daylight driving at 55 m.p.h.
No deposit required

On the road solid since September 2009

Try calling, PM me if you can't get thru
(Nebraska cell phone service is not that great)

Jim
(260) 804-6695

Sunset Classics

May 5th

I am in Lexington, Nebraska for a few days ....

Headed west along I-80 thru Nebraska, Wyoming, Utah
to Reno, Nevada next

[attachment=10381]TThumbsUp.jpg[/attachment]

Transport space is available up to 35 feet

Thanks!

Jim
(260) 804-6695

MikeWA

Geez, I hope you made sure that thing isn't loaded!

I still get a shock sometimes when I look in the rearview mirror and a Hudson is tailgating me (on the trailer). Guess it would be a little off-putting to look back down the barrel of a howitzer, as well!:ohmy:

Trulyvintage

The jeeps & trailer were from the military vehicle collection
of Chet Krause in Iola, WI

One of the nicest gentlemen I have met,

Jim

Sunset Classics

As long as your packing heat I will yield you the right-of-way.

I'm thinking the one on the back is a mighty-mite?

Sunset Classics

[attachment=10529]Housecar.jpg[/attachment]
May 20th

Room for vehicle transport from
the Reno, Nevada area east to Ohio

17 to 18 feet available

Safe daylight driving at 55 m.p.h.
No deposit required
On the road solid since September 2009

Check out Nebraska Rods' very cool 1957 Chevy 210for sale on my You Tube Travel Channel:

@ http://www.youtube.com/user/TrulyVintageOnDaRoad?feature=mhee

Jim
(260) 804-6695

Trulyvintage

May 20th

Vehicle transport

[attachment=10679]Housecar_2011-05-18.jpg[/attachment]

Available to haul from Chattanooga, TN & surrounding area
to most major cities if my trailer is full

I will have 35 feet of open trailer space available
for vehicle transport with 10,000 pound capacity

Safe daylight driving at 55 m.p.h.
Dexter E-Z Flex suspension absorbs up to 80% of road vibration
Up to 100 inches wide
Built in loading ramps
No deposit required

On the road now solid since September 2009

Jim
(260) 804-6695

Trulyvintage

May 25th

25 feet w/ 8000 pound capacity available
for vehicle transport from Nashville, TN
west along I-40 to San Diego, CA

[attachment=10712]TDesertHearse.jpg[/attachment]

Traveling thru

Little Rock, AR
Oklahoma City, OK
Amarillo, TX
Albuquerque, NM
Flagstaff, AZ
Barstow, CA

Jim
(260) 804-6695

Sunset Classics

"You'll see Amarillo,
Gallup New Mexico
Flagstaff Arizona,
Don't forget Winona,
Kingman, Barstow, San Bernadino. . ."

You sure you aren't on Route 66?

Trulyvintage

Mike,

Try taking I-30 if you have to go across I-80
it is the Lincoln Highway

May 26th

Vehicle & parts transport

Check out my route before you call

@ http://mapq.st/kTYEWD

Starting in Dalton, Georgia
Headed to Riceville, Tennessee
Then to Cardington, Ohio
Next to Fresno, California
Ending in Escondido, California

Thanks,

Jim
(260) 804-6695

Trulyvintage

May 26th

In Cincinnati, OH now ...

Headed next to Columbus, OH early Saturday.

Then to Fresno & Escondido, CA

Right now I have 15 feet of space
available w/ 5000 pound capacity if you need a vehicle hauled

Jim
(260) 804-6695

" Living on the road my friend
Was gonna keep you free and clean
Now you wear your skin like iron
Your breath's as hard as kerosene "

Trulyvintage

June 7th

17 feet of room available
5000 pound capacity

Fresno up to Sacramento, CA
Then east along I-80 to Reno
South to Carson City & Dayton, NV

Full east from Dayton, NV

Jim
(260) 804-6695

" Living on the road my friend
Was gonna keep you free and clean
Now you wear your skin like iron
Your breath's as hard as kerosene "

SamJ

The late, great Townes Van Zant. Watch out for the Federales, (Staterales?), Jim. Thanks for bringing my '40 from Southern Cal to Santa Fe a couple of years ago. You're the best! How's your dog doing? :cheer:

"Oh, those old State Smokeys say,
We coulda had him any day
But we let him get away
He had Hudsons as his load..."

Sunset Classics

Funny you mention that ....

I got pulled over outside of Dayton, NV today
Was advised I was going too slow (55 in a 65 m.p.h. zone)

Revenue time ....

Jim

Sunset Classics

[attachment=10870]TDevanSteam.jpg[/attachment]

June 23rd

35 feet of vehicle transport space available from
Windham, NH 03087 to Chattanooga, TN

My tentative route @ http://mapq.st/mGTBjW

I can also pick up in Pennsylvania - Ohio - Kentucky
for vehicle transport to the West Coast

Continuing west along I-40 to San Bernadino, CA
with 18 feet of car or truck transport space available

My route @ http://mapq.st/mg6aoG

Thanks !

Jim
(260) 804-6695

ClassicCar

Howdy, Stranger!

Categories

In this Discussion

We'd love to hear from you! info@classiccar.com