Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions26,920
- Orphaned Marques
- ↳ Hudson20,986
- ↳ Street Rods798
- ↳ Off Topic556
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash71
- ↳ Packard163
- ↳ Studebaker121
- Classic American Cars
- ↳ Ford Motor Company959
- ↳ Chrysler Corporation478
- ↳ GM Corporation1,394
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,961
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- hoggyrubber August 2012
- Marconi August 2012
Lube Question
-
What to pour in the cylinders before trying to turn the engine over by that i mean trans fluid ? pb blaster? both together any sugg.? 52 308 Not run in 40 years plus. Thanks John
-
it was suggested to me to pull oil pan and clean out crude first, which i did. but even with that i never could get 2 valves unstuck without pulling head and the rings without pulling pistons. i have heard good things about kroil or acetone/atf mix. good luck!
-
I've had great sucess with Kroil.
