ClassicCar

rbennett47

Need the plug that fits in the hole in the floor through which you check and add Hydro tranny fluid. I know they're a "high-casualty" item (checked with Jason Fisher and Gene Eshelman) but thought I'd put the word out. Any condition as long as it's mostly still there is fine. Thanks, Bob

rbennett47

**==

GrimGreaser

Try your hardware store, mcmaster-carr or grainger. I could have sworn I found a found the right size at mcmaster-carr.

bent metal

Grim Greaser, I think he's talking about the cover in the floor and your talking about the plug in the tranny itself.

Tallent R

I f you need one I should have some. I will check my warehouse this afternoon
Roger

GrimGreaser

that's what I mean, the 2 1/2" plug for the floor. I found them somewhere. McMaster has plastic hole plugs to 2 1/2", but I think I found the metal ones too.

Plastic:
http://www.grainger.com/Grainger/Hole-Plug-1ELY4

Tallent R · ebay items 5-13-2012 006 (1024x766).jpg

I grabbed you the wrong piece ,I see now what you want - the round ones .I will check again for those .Should have some of them too,
Roger

Tallent R · ebay items 5-13-2012 008 (995x1024).jpg

How about this , is this what you are after? Its hard to see in the photo but all the little tabs are there that hold it in,
Roger

53jetman

Roger - I could use one of those plugs for my '54. How do I get in touch with you. Also, in some '54's they had a larger rubber plug that you would remove from the carpet to get to this metal hole plug. Do you have any of those?

Jerry

Tallent R

I dont have any of those rubber ones . I know there is two of these round metal ones in stock right now. My phone number is :636-448-3878
Roger

rbennett47

Thanks so much guys; I found one locally. Been busy and dropped the ball, but thanks for the input.

russmaas

Have one of the rubber larger ones if still needed. russmaas@frontier.com

ClassicCar

Howdy, Stranger!

Categories

In this Discussion

We'd love to hear from you! info@classiccar.com