Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,225
- Orphaned Marques
- ↳ Hudson21,262
- ↳ Street Rods808
- ↳ Off Topic569
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash71
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company959
- ↳ Chrysler Corporation478
- ↳ GM Corporation1,397
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,967
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- dterry-2011 March 2012
- mars55 March 2012
- rmcfhudson March 2012
- Tallent R March 2012
- walts garage-53 March 2012
WDO carburator gaskets
-
Hi I am in need of carburator gaskets for my 37 Hudson eight. Carb is a Carter WDO. Previously I was able to use a Victor # G31154 that fir some type of Japanese car.
Victor apperently has gone out of business and there is no cross reference. I don't remember what car the gasket fit. Does anyone know another brand and part # or the car that the gasket fit. Thanks for your help.
Ron -
I have some for the later Stepdown 254 with the WDO carb . Will those fit the older ones also ?
RogerRetired Tech. -
All WDO's and WDG's take the same gaskets on 1948 to 1954. Walt.
-
Daytona parts company they do nothing but carbs seem very good. Just punch in daytonaparts.com. cheers
-
As far your carburator base gasket goes, I found the following. One, the Victor # G31154 gasket fits Nissan 1977 - 1980 200SX and pickup with 2.0L engine. Second Victor Reinz is still in business. Third you buy the gasket from Rock Auto.
http://www.rockauto.com/ -
Napa store told me they dropped the Victor line because they were going away. I found it at Rockauto. Thanks you very much for everyones help.
Ron
