Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions26,920
- Orphaned Marques
- ↳ Hudson20,986
- ↳ Street Rods798
- ↳ Off Topic556
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash71
- ↳ Packard163
- ↳ Studebaker121
- Classic American Cars
- ↳ Ford Motor Company959
- ↳ Chrysler Corporation478
- ↳ GM Corporation1,394
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,961
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
carb. gaskets
-
how many gaskets thickness wise does it take on a twin h Thanks John
-
If you are using the NOS style thick gaskets (1/8" thick), you need 4 for each carb, two under the heat shield, and two over the heat shield. That makes the total 8 gaskets for a Twin H. If you are using the new Felpro # 60269 (1/16" THICK) gaskets then you need to double that number, or use a carb base spacer of some kind. Be aware the Felpro # 60269 sell for about $3-4 each on average, so it can be expensive for the whole set of 16, if you go that route.
-
How many gaskets are needed for single carb 262?
-
Thanks ken, yep 3.99 at the corner napa, Ill keep loking . Maybe some nos will pop up. Plenty to do before i get to that point anyway. John
