Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

In this Discussion

Need A set of rear drums from a '50 Pacemaker
  • HornetSpecialHornetSpecial
    Posts: 185Gold Member
    Does anyone have some rear drums off a '50 pacemaker they would sell? Not to thin!!Please give me a call at 651-257-9191 Will pay for drums and shipping.
    Thanks, Paul in MN.
  • 53jetman53jetman
    Posts: 873Platinum Member
    Paul - Actually, rear drums off of any model step down will fit a '50 & up Pacemaker.
    Jerry
    email: HudsonJetman@mail.com
    2nd Generation Hud-Nut
    HET Tech Adviser on Hudson Jets 1953 & 1954
    HET Registrar of all Hudson Jets
  • HornetSpecialHornetSpecial
    Posts: 185Gold Member
    Thanks 53jetman. I thought they were all the same '50 and up
  • Huddy42Huddy42
    Posts: 1,003Platinum Member
    I would have some NOS ones, but shipping would be out of the question.

    Why don't I live in the USA then I could sell some of my goodies.
  • middletom
    Posts: 132Expert Adviser
    If you can't find some from this site I might suggest Googling for antique car parts and put in what you are looking for. A couple years ago I did that to get a rear drum for my 1950 Pacemaker and was answered by a salvage yard in Wisconsin. I don't remember their name now but they quickly sent a drum. $90.00 all told.

    middletom
  • chopperchuckchopperchuck
    Posts: 277Gold Member
    i could pull & sell mine,but they have been used since 59 {1959} i'm gonna replace my rear any way,.........any secrets to getting them off???????? :dry:

    mine's a 49....
    Have you kissed a PIT BULL lately?

    Greeley Colorado

  • lsfirthlsfirth
    Posts: 273Gold Member
    Hey Chop,

    Too bad you don't live closer, you could have my entire rearend.... Not sure if the drums are any good, but it was last licensed in 1956 :-) . Want me to pull them off and put a caliper on them? What numbers are good or bad. If they're worth it, all you'd have to do is cover shipping.

    Lee
    [attachment=13561]IMG_6999.JPG[/attachment]
    IMG_6999.JPG
    800 x 533 - 36K
    This Hudson project is starting to scare the crud out of me!!!
  • bobbydamitbobbydamit
    Posts: 275Gold Member
    Paul why don't you come by and pull mine yourself. Snow gone now and doors are open. I can help next week, but busy at gun show this one. "E" mail me if interested. :unsure:
    Bobbydamit