Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

In this Discussion

restoration hudson 1949
  • pierre from francepierre from france
    Posts: 119Expert Adviser
    thanks hudsonsplasher
  • VicTor ZVicTor Z
    Posts: 496Platinum Member
    ???????? :huh:
    Hello

    can it find the coating under the table nine?

    p1010615f.jpg
  • 54SuperWasp54SuperWasp
    Posts: 522Gold Member
    Hello

    can it find the coating under the table nine?

    p1010615f.jpg
    Bonjour Pierre, je crois qu'il faudrait reformuler la question en français et je pourrais la traduire car celle-ci est incompréhensible en anglais. Michel

    I'm asking Pierre to ask his question in french and I could translate it in english.
    Michel
  • pierre from francepierre from france
    Posts: 119Expert Adviser
    AH sorry lol , michel en fait il s agit du revetement qui se trouve sous le tableau de bord, la cloison pare feu. le mien ci dessus est hors d'usage , je voulais savoir si on pouvait le trouver en neuf .
    Merci beaucoup Michel pour la traduction;)
  • 54SuperWasp54SuperWasp
    Posts: 522Gold Member
    AH sorry lol , michel en fait il s agit du revetement qui se trouve sous le tableau de bord, la cloison pare feu. le mien ci dessus est hors d'usage , je voulais savoir si on pouvait le trouver en neuf .
    Merci beaucoup Michel pour la traduction;)
    Pierre says that this part is located under the dash, acts as a firewall and is no more good. Would like to know if he could find a new one.
    Hope it helps. Michel
  • 54SuperWasp54SuperWasp
    Posts: 522Gold Member
    I'm pitting this back-up for Pierre. I tried to translate what he was asking for. Just look my previous answer. Thnaks, Michel
  • pierre from francepierre from france
    Posts: 119Expert Adviser
    Hello

    Someone has a picture of the fuel door, I do not understand how to place the springs? Thank you
  • onerare39onerare39
    Posts: 528Hitchhiker
    Pierre,

    This was a topic of discussion on October 31, 2011. Hope this helps.

    Gas Door Springs

    John Forkner
  • pierre from francepierre from france
    Posts: 119Expert Adviser
    Hello

    today I began the renovation of the engine:woohoo:
    P1010694.JPG
    800 x 600 - 59K
    P1010695.JPG
    800 x 600 - 39K
    P1010699.JPG
    800 x 600 - 55K
    P1010701.JPG
    800 x 600 - 56K
  • Tallent RTallent R
    Posts: 1,576Platinum Member
    Clutch cork still look prety good
    Roger
    Retired Tech.
  • pierre from francepierre from france
    Posts: 119Expert Adviser
    Hellowho can tell me or I can buy these pipes for the oil filter?

    P1010704.JPG
    3072 x 2304 - 4M
  • Tallent RTallent R
    Posts: 1,576Platinum Member
    Probably on Ebay would be your best bet for new ones. I have some used ones but they would be about the same as what you have now
    Roger
    Retired Tech.
  • 51hornetA51hornetA
    Posts: 2,338Platinum Member
    You can get ones made up at a tractor supply house. Or I got mine made by the guys who relined my brake shoes. They make up all kinds of lines. If you find them NOS they are probably not good to use. Any hydraulic hose supply shop can make them.
    www.hudsonmotorcar.org
  • pierre from francepierre from france
    Posts: 119Expert Adviser
    motor restoration
    P1010758.JPG
    3072 x 2304 - 5M
    P1010760.JPG
    3072 x 2304 - 4M
    P1010757.JPG
    3072 x 2304 - 5M
  • 54SuperWasp54SuperWasp
    Posts: 522Gold Member
    Bravo Pierre! Tu en as accompli du travail depuis 1 an. Moi, dans le même temps, tout ce que j'ai pu faire, c,est d'enlever le pare-choc arrière et le siège avant... Félicitations! Michel

    Bravo Pierre! You did a lot since last year. I was able only to get the back bumper and the front seat off of my 54 in 18 months... Congrats! Michel