Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,221
- Orphaned Marques
- ↳ Hudson21,261
- ↳ Street Rods808
- ↳ Off Topic569
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash71
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company959
- ↳ Chrysler Corporation478
- ↳ GM Corporation1,397
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,967
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- ClassicChevys December 2011
- GlobalCarDealers December 2011
- Marconi December 2011
Transmission help
-
Hey guys. Ive been workin with cars for a long time. But ive never really been a transmission/driveline guy. I took the gearbox cover off of a borgwarner super t-10 4 speed to check for metal shavings with a magnet. Nothing came up so i put it back together and in the car but now the positions for 1st and 2nd gear are switched as well as 3rd and 4th. What did i put in backwards?
Thanks -Casey -
Sounds like you flipped the levers over on the outside of the side cover. They should be pointing up, I believe. On vehicles with column shifters the levers point down, and with a floor shifter point up. Try flipping them 180 degrees and see if that works!
-
Have you tried to fix the problem? Did you successfully tried the above suggestion? Share your experience.
-
They're pointing up. it's a 68 firebird so i assume thats correct. I think i'll try pointing them down and see what happens. I probably shouldve taken a picture before taking it apart...but i did the swap from a th400 to the 4 speed myself and it worked fine for a while.
