Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,063
- Orphaned Marques
- ↳ Hudson21,133
- ↳ Street Rods807
- ↳ Off Topic574
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,959
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- bobdriveshudson November 2010
- faustmb November 2010
- mrsbojigger November 2010
Metal shaping gathering on 13th
-
[attachment=8459]texas metalshapers November 13th.jpg[/attachment]
GATESVILLE METAL SHAPING GATHERING NOVEMBER 13th 2010
PLEASE NOTE CHANGE OF LOCATION!
There will be an informal Gathering of those that are interested in metal shaping in Gatesville Texas on November 13th 2010.
Our host will be Clint Egger and held at his shop in Gatesville. The address is 3045 FM107.
For more information you may contact Gordon (Don) Bartlett at: stingshp@taylortel.net
Since the Gathering itself is free, we suggest contributing $20 each to offset Clint’s expenses for lunch, drinks, donuts/munchies, Ox/Act. Gasses, electricity, etc.
Besides your “small project”, please remember to bring your safety gear for hearing, eyes and hands, etc.
Remember! This Gathering is for learning metal shaping and having fun!
Motels:
Best Western Chateau Ville Motor Inn (254) 865-2281
Regency Inn (254) 865-8405
Holiday Inn Express (254) 865-1207
Restaurants:
Burger Boy, Stockyard, El Tapatio (there are two of them, go to the one by the hospital.), J&M Hill Country BBQ, Swindall's, The Feed Mill, Prima Pastawww.themodernartist.com -
Wish that was closer... I need to find something like that around here. It's fascinating to me what can be done.
-
I attended my first one last Oct and thoroughly enjoyed the activities and getting to work on others projects and my own ones. A real good bunch of guys and one lady. I stayed at my daughters and drove in about 3-4 days. Will do it again. BobP
-
Hi Guys,
Yes they are a lot of fun while learning a craft. One thing for sure, if you get involved with all of it during the day you go home "One tired puppy!" but with a smile on your face.
Peace,
Chaz
[attachment=8460]Granbury 10.jpg[/attachment]
[attachment=8461]Granbury 4.jpg[/attachment]
[attachment=8462]Granbury 18.jpg[/attachment]
[attachment=8463]Granbury 26.jpg[/attachment]
Granbury 10.jpg319 x 480 - 42K
Granbury 4.jpg500 x 375 - 46K
Granbury 18.jpg500 x 375 - 47K
Granbury 26.jpg500 x 375 - 53Kwww.themodernartist.com -
[attachment=8496]texas metalshapers November 13th_2010-11-16.jpg[/attachment]
We did it again! Our metal shaping gathering at Clint Egger's shop had 18 attendees. Their experience levels ranged anywhere from Rolls Royce restorations to complete newbies that had never worked a piece of sheet metal. We had projects for them to work on that were small enough so that at the end of the day they could go home with something tangible they had accomplished. Some nice bowls and teardrop blisters came out of the group. Other projects worked on were repairs to my '51 Hudson hood (rounding the corners), a new motorcycle tank, an aluminum spinner from an aircraft, an aircraft wheel pant and the rear quarter panel of a '32 Chevrolet coupe. Quite a varied assortment of projects!
[attachment=8497]1aDSC02499.jpg[/attachment]
[attachment=8498]1aDSC02505.jpg[/attachment]
[attachment=8499]1aDSC02503.jpg[/attachment]
[attachment=8500]1aPB130082.jpg[/attachment]
[attachment=8501]1aTMS GATESVILLE_8.jpg[/attachment]
[attachment=8502]1aTMS GATESVILLE_7.jpg[/attachment]
[attachment=8505]1aPB140099.jpg[/attachment]
texas metalshapers November 13th_2010-11-16.jpg500 x 125 - 26K
1aDSC02499.jpg600 x 450 - 74K
1aDSC02505.jpg600 x 450 - 72K
1aDSC02503.jpg600 x 450 - 74K
1aPB130082.jpg600 x 450 - 93K
1aTMS GATESVILLE_8.jpg600 x 399 - 65K
1aTMS GATESVILLE_7.jpg399 x 600 - 60K
1aPB140099.jpg600 x 429 - 65Kwww.themodernartist.com -
Too cool. I guess I'll have to content with some practice & gullwingInn's channel on Youtube
Thanks for posting the pics... -
Matt:
Next time I see/hear of a metal meet east of the Mississippi, will pass info to you, please do the same for me. Thanks, Bob P Florence, AL
