ClassicCar

herm

I have a Carter carb. and would like to know if and what Hudson it would be correct for. Casting # 286. Tag # 505 SA. Metering rod - 75-638. Thanks. Norm:confused:

Chuck G

Your tag number does not match up but your casting number matches a 1941- 1947 3x5 engine. I hope this helps Chuck G.

hudsontech

Casting number is for carburetor WDO-461S used on Models 41, 43 after serial number 3116 (1940 Six Cyl), 1941 before S/N 2140 and Models 10, 18, 20 and 28 with 212 engine.

Metering rods (2) for the 461 Carb were:

Standard - 75-404

1 size lean - 75-414

2 sizes lean - 75-415

3 sizes lean - 75-416

I have most carburetor sheets 1935-1941 and 1948-1954 - the metering rod you listed is not shown on any of them. If I find the info, will post later.

Hudsonly,

Alex Burr

HudsonTech

Memphis, TN

hudsontech

herm wrote:

I have a Carter carb. and would like to know if and what Hudson it would be correct for. Casting # 286. Tag # 505 SA. Metering rod - 75-638. Thanks. Norm:confused:

Just ran a google search on "Carter 505-SA" - hit gave me 1937-1940 Oldmobile 8 cylinder.

Hudsonly,

Alex Burr

HudsonTech

Memphis, TN

Chuck G

Alex

thanks for the info. i will have to remember to use Google search. I just have a list of Hudson carbs and year they fit. It helps but not as much as your info.

Thanks Chuck G.

ClassicCar

Howdy, Stranger!

Categories

In this Discussion

We'd love to hear from you! info@classiccar.com