Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

In this Discussion

HUdson 8 Air Cleaner Needed
  • EssexAdvEssexAdv
    Posts: 515Moderator
    Here I go again...so far every posting I have placed fro parts fro my 52 Comm-8 has been successful. So here I go again

    I need an Air filter for my 52 Comm 8. It must be in good condition. This is the filter that goes off to the side of the carb not the one which sits atop it. I need the entire air-filter...brackets and all

    any help???

    Thanks
  • bill a
    Posts: 1,570Platinum Member
    Lew, I Probably Lhave One. Willl Look Sat, Bill Albright
  • EssexAdvEssexAdv
    Posts: 515Moderator
    Thanks Bill, please let me know
  • dave sdave s
    Posts: 1,178Moderator
    Lew, I have an extra from my 1949 8, if you can use it, I can take to Hershey.
  • bill a
    Posts: 1,570Platinum Member
    dave to the rescue, save me from digging, bill a.
  • EssexAdvEssexAdv
    Posts: 515Moderator
    Thanks Deve, I need it. Do you ahve any of the brackets....? Lew
  • SRCraftsman2SRCraftsman2
    Posts: 417Platinum Member
    EssexAdv wrote:
    Thanks Deve, I need it. Do you ahve any of the brackets....? Lew

    Lew:

    Check with Dave as to the location of the bracket from the air cleaner to the water jacket. My "52 has its bracket one hole forward than some of the early stepdowns I have seen, the result is the air cleaner sits a little closer to the radiator. I do not know if this is a year adjustment or the person who rebuilt my engine put the mounting studs in the wrong holes.

    Pat
  • EssexAdvEssexAdv
    Posts: 515Moderator
    SRCraftsman2 wrote:
    Lew:

    Check with Dave as to the location of the bracket from the air cleaner to the water jacket. My "52 has its bracket one hole forward than some of the early stepdowns I have seen, the result is the air cleaner sits a little closer to the radiator. I do not know if this is a year adjustment or the person who rebuilt my engine put the mounting studs in the wrong holes.

    Pat
    Thanks Pat

    Lew