Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,052
- Orphaned Marques
- ↳ Hudson21,122
- ↳ Street Rods807
- ↳ Off Topic573
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,959
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- 46HudsonPU March 12
- cargray March 12
- Kevin C. March 12
- lostmind March 11
- Ric West IN March 11
- StillOutThere March 12
What year coupe body?
-
This Hudson (or Terraplane) coupe body was sitting along the fence at a closed (it was Sunday) salvage yard. By that body belt line can it be identified for exact year? Thanks.
DSCN1954.JPG1280 x 960 - 373K -
I'm going to guess 1938 based on what I can see of the dash and the front end with high shock mounts . :)
"Ric" -
38 & 39 are very close, with many of the same or very similiar components (frame, doors, etc).
A closer picture of the dash would help, however if it is a 'Utility Coupe' (i.e., commercial series) it could be a '39 with a '38 dash (as with my '39 112 P/U). Serial number - located on the right-front pillar, would tell the tale. -
I agree with Rick. It could be either a 38 or 39. It's definitely a SWB so that would make it a 112. There are several 39 coupes in the club that have 38 dashboards like Rick's P/U.
You wouldn't have to open the door to get the VIN as it is stamped on the side of the frame just forward of where the last body bolt is located.
Kevin C. -
I took the pic over the fence and the yard is 100 miles away so I won't be learning more unless I go back that way. Thanks for your help.
