Find A Classic Car
Thousands of listings here >>
sell your classic car
FREE to list - Online until sold

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Categories

In this Discussion

Piston and rings
  • Fred
    Posts: 113Expert Adviser
    Jethroe (46 Hudson pickup) with 50 262 engine needs a piston(.060 oversize) and a complete set of .060 oversize rings. Whoever bored it out didn't have the rings lined up (over the pins) and caused havoc. Dale Cooper is searching but i'm posting this for backup.
    Thanks, Fred
  • Tallent RTallent R
    Posts: 1,575Platinum Member
    Check with Russ Maas 21 century Hudson,
    Roger
    Retired Tech.
  • Fred
    Posts: 113Expert Adviser
    Russ doesn't have one. Nor Dave Kostansic. Any other suggestions?
  • Ol racerOl racer
    Posts: 1,677Platinum Member
    Fred,
    Check with 'neighbor Wisco'
    If dont work out check Online at Following Suppliers for contact Info. May have buy a Set.If so have made 3 Ring like modern motors for less drag, Sure one or more of following may help.....
    Ross Pistons
    Berta Pistons
    Grindlays Pistons
    Egge
    Mahle Pistons
    www.Manleyperformsance.com (Manley in NJ Inq for Pistons)
    Arias Pistons
    Good Luck
  • TwinHTwinH
    Posts: 536Platinum Member
    Packard Industries is a big wholesale outfit in Boonton, NJ. My 2011 catalog says limited stock on 262 pistons and no pinned rings. Again wholesale only,but if your striking out elsewhere maybe worth a shot. 880-768-3646 but I'm guessing the vendors you've checked with have already covered this...
  • brumac
    Posts: 188Expert Adviser
    Please consider EGGE as your last resort. This is from my personal experience. PM me if you need to know!

    Bruce
  • Lee ODellLee ODell
    Posts: 1,841Platinum Member
    WTN ad by Dale Cooper list .060 Pistons for $55 ea. and '48-'56 Grant piston ring sets $85-$95 (513) 821-6200
    Lee O"Dell
  • Fred
    Posts: 113Expert Adviser
    OOPS! Thanks to Hedley Bennett, I pulled pistons marked .060 on top and measured them. Pistons are standard 3 9/16. Hedley is shipping one and also Std. rings. Thank you for all the leads. Jehtroe will rule Northeast Ohio again. I really appreciate all the replies on this forum. It is a most fantastic resorce.
    Fred Lorenz
  • lostmindlostmind
    Posts: 516Gold Member
    Hi Fred , I've got two more standard pistons if find you need more.
    Roy
  • Tallent RTallent R
    Posts: 1,575Platinum Member
    You mean they were actualy stamped wrong and Headley had run across this before?
    Roger
    Retired Tech.
  • Fred
    Posts: 113Expert Adviser
    I think what Hedley found was that the pistons were made (and stamped) ovesize and then at a later date machined to fit a particular need. That was what I got out of the jist of our conversation. Brilliant, just like a pint of Guiness!
  • Tallent RTallent R
    Posts: 1,575Platinum Member
    That means in the past a good machine shop stocked the biggest size then cut them down as needed. Handy way to gey the fit you want ,
    Roger
    Retired Tech.
  • Terraplane33Terraplane33
    Posts: 233Gold Member
    You can ask this great man !



    I love to watch his video again and again, he helped me in a quite critical situation considering I'm living in France...
    Location : France
  • ESSX28-1ESSX28-1
    Posts: 995Platinum Member
    Terraplane33 wrote:
    You can ask this great man !
    I love to watch his video again and again, he helped me in a quite critical situation considering I'm living in France...

    I couldn't agree more. Lester had NOS Pistons, rings & gudgeon pins for my 29 Essex engine!! Not only did he have them but he mailed them all the way to New Zealand without waiting for my son's check to arrive. I can't speak highly enough of the service & Lester's very reasonable prices. He is also most knowledgeable about the obsolete parts he sells.
    Dave Y
    New Zealand
Add a Comment
ClassicCar

Thousands of Classic Cars for Sale - Free to List.

Since 1996 we're been the place to go to for all things Classic Car. Classifieds, news, events, community and so much more. No clutter. No hassles. Just Classic Cars.

We'd love to hear from you! info@classiccar.com

Copyright 2011-2013 Classic Car
All rights reserved.

We accept no responsibility for inaccuracies. All trademarks acknowledged.