ClassicCar

Chipmaker

does any one know of a list of the vendors that are planning to be at the OKC national meet?

russmaas

We will be there Tuesday afternoon...the amount of stuff we are bringing every year gets smaller and smaller since the foot traffic to the swaps is decreasing every year. With bus' leaving for sites in the morning and returning late afternoon everyday it is not worth bringing heavy objects such as glass, doors, engines etc.

We actually sell more stuff thru the internet. I remember the days were the swap was the place to be...it has now moved to the lobby
:dry:

VicTor Z

Vic's Automotive Window Channeling Will not be there, life gets in the way. This will be the third National I have missed. See my adds in the WTN. I will be offering Forming of the Window channeling that has stainless beading. VicTor Zamora (562) 947-5864 voice mail. NOTE! My phone Number in the last Roster is WRONG!

Tallent R

I'm loading up my truck and trailer now ,will be bringing rusty Hudson pickup truck and truck parts. Have 18 Hudsons at home and a warehouse full of parts. So if you need something speak up. If I have it I'll throw one on the truck for you
Roger:P

bobdriveshudson

We are bringing four (4) Dual Outlet Exhaust Manifold Adapters to the OK City meet, this is the last of the 20 we had cast Jan 2010. First come first served. Will be taking tours, and either before or after the tour will set up on my truck tailgate to show to anyone interested. We have a stock exhaust manifold to show how the adapter is advantage over the stock part it replaces.
If enough interest develops, we will consider ordering more forgings. Hope everyone drives safely and see you at the meet. We're in Branson tonite, some cooler than Alabama.
We have prepared a sheet of "tear-offs" with my phone # that will be taped to my truck window. Red 2004 Ford F150 extended cab. Alabama plates. Call me if you are interested and dont see me. Thanks, Bob Parks

bobdriveshudson

Roger:
Did you still have any front doors for a brougham, left or right or both, need to fit a 1952 Wasp brougham. Need some good metal, mine are bottom rusted, outside and inner frame. Appreciate your help. Will check this site tomorrow and my email. hetpbebop@gmail.com Thanks, Roger. Bob Parks

cargray

Dont think there has ever been a "list" of vendors at a National meet,,Part of the fun is, you never know WHO or WHAT will show up.....

I will be bringing some NOS stuff that has not seen the light of day in 25 or 30 years { and some used }. Also a 47 S6 coupe that has never been to any Hudson meet, and a TERRAPLANE lighted sign, that is extremly rare.

I should be there Tu. afternoon..should be warmed up by then LOL

ski4life65

I will be bringing a trailer full of stepdown and Hash sheetmetal (most is sedan, fenders, trunks, hoods), and about a dozen Twin-H linkages I repopped. Might bring a few more small items.

Chipmaker

Thanks for the info.Hope to see you there.I am looking for rubber parts,some trim,and the fasteners for it for a 47 pu.

RL Chilton

Roger-

Got any convertible parts? If you have any of the channel for mouting the stainless on the sides of a '52-'53, I'd be interested in getting a whole set, like speedline trim, or the trim at the bottom of fenders, doors, quarters. I was going to mfg. all that stuff, but if I had originals in good shape, I'd use them.

dave s

Russell, We use the stainless ones that K-Gap has. We cut them in pieces about 6 inches and they work fine with no worry about rust in future.

RL Chilton wrote:

Roger-

Got any convertible parts? If you have any of the channel for mouting the stainless on the sides of a '52-'53, I'd be interested in getting a whole set, like speedline trim, or the trim at the bottom of fenders, doors, quarters. I was going to mfg. all that stuff, but if I had originals in good shape, I'd use them.

EssexAdv

[attachment=11269]DSC00557Small.JPG[/attachment]
Russ, The 2012 National is going to be in Gettysburg PA. We are dedicating one day to Flea Market events only; NO TOURS. Hopefully this will spark some increased interest in the vendor offerings.

ClassicCar

Howdy, Stranger!

Categories

In this Discussion

We'd love to hear from you! info@classiccar.com