Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,081
- Orphaned Marques
- ↳ Hudson21,146
- ↳ Street Rods807
- ↳ Off Topic574
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,963
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
Hornet Wheel Lug bolts needed
-
Had a flat yesterday. Damn near couldn't get the wheel bolts off. Turned out the bolt threads are severely worn and some P.O. idiot had "fixed" the problem by doping up the threads with JB weld.
Does anyone have a set of new or good serviceable wheel bolts for '51 Hornet? I'm thinking I could use at least 10 for the two rear wheels.
phil @ hetauldridge.org (drop the het) -
Tractor supply should have The thread size is 1/2 - 20 x 7/8 long, and the hex is 3/4 across the flats. Other source is NAPA Balkamp 641-1008
-
dave s wrote:Tractor supply should have The thread size is 1/2 - 20 x 7/8 long, and the hex is 3/4 across the flats. Other source is NAPA Balkamp 641-1008
Yup.
I've purchased em at NAPA.Workin Stiff -
Thanks to all,
Before reading any of these, I found what I needed at a local parts store. Appreciate all the feedback.
