Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,075
- Orphaned Marques
- ↳ Hudson21,141
- ↳ Street Rods807
- ↳ Off Topic574
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,962
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- 98truck November 2010
- bob ward November 2010
- hoggyrubber November 2010
7c tie rod end part question
-
i have looked up the tie rod ends in my new master list parts book and it lists 300348 and 300349. if i need both inners and both outers are both left ones and both right the same? do i buy 2 of each part #? thanks, hoggyrubber
-
The inner and outer tie rod ends are the same apart from the LH & RH threads, you need a LH & RH pair on each tie rod. So yes, if you are replacing them all you need two of each.
-
Thanks Bob so that means if a ford tie-rod fit I can use it right ???
I have another question if you don't mind.
Where would I find brake shoes for my 31 Essex?
Thanks George -
98truck wrote:..... so that means if a ford tie-rod fit I can use it right ??? ...
Yes, some Fords of that era used the same tie rod end.
Can't help with brake shoe info, but I would be tempted to go to a brake place and have them bond soft linings on your shoes, and they can skim the drums while they are at it. -
thank you for the info! i am ordering 2 each.
