Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,034
- Orphaned Marques
- ↳ Hudson21,105
- ↳ Street Rods807
- ↳ Off Topic573
- ↳ American Motors148
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,959
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- 46HudsonPU November 2009
- Jim Kilday November 2009
- Jon B November 2009
- mars55 November 2009
- walts garage-53 November 2009
Need source for parts
-
What is the best and fastest source for ignition points and condenser?
Would NAPA stock these and if so, what is the NAPA Part Number?
I also need to replace the overdrive cable and the control from the heater to the valve on the head? Who might have these parts?
I appreciate your help. -
Jim Kilday wrote:
Just hit a NAPA store and ask for the parts you need. I get all Hudson tune up parts at NAPA and the price is right. Walt.What is the best and fastest source for ignition points and condenser?
Would NAPA stock these and if so, what is the NAPA Part Number?
I also need to replace the overdrive cable and the control from the heater to the valve on the head? Who might have these parts?
I appreciate your help. -
Fastest way to find an overdrive cable? Have you tried Stu Coleman, in Montana? He might have an old one kicking around. (Contact info's in the National roster)
-
For a '46 8 cylinder which uses an Autolite 1GP4008A distributor, Standard lists AL-5661X points and AL-111X condenser which crosses to NAPA CS709 and AL869.
-
Jim Kilday wrote:
Napa also has the Champion J-7 or J-9 plugs you will need. J-7 for highway driving or J-9 for city driving. Walt.What is the best and fastest source for ignition points and condenser?
Would NAPA stock these and if so, what is the NAPA Part Number?
I also need to replace the overdrive cable and the control from the heater to the valve on the head? Who might have these parts?
I appreciate your help. -
I got the ignition parts from Dave Kostansek. I figure he can use the business.
I'll contact Stu Coleman about the cables.
Thanks for your help. -
Jim Kilday wrote:
Yup, just ordered tune-up kits for my 212 & 232, plugs and plug wires from Dave yesterday (440-293-4079). Need to order some additional parts, but that wills keep me busy for a little while...I got the ignition parts from Dave Kostansek. I figure he can use the business.
I'll contact Stu Coleman about the cables.
Thanks for your help.
:rolleyes:
