Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- All Discussions27,077
- Orphaned Marques
- ↳ Hudson21,143
- ↳ Street Rods807
- ↳ Off Topic574
- ↳ American Motors149
- ↳ Kaiser - Frazer70
- ↳ Nash70
- ↳ Packard163
- ↳ Studebaker122
- Classic American Cars
- ↳ Ford Motor Company956
- ↳ Chrysler Corporation477
- ↳ GM Corporation1,396
- ↳ Post War Chevrolets75
- ↳ Pontiac Forum119
- General
- ↳ All makes1,963
- ↳ Poll Discussions24
- Swapmeets & Events
- ↳ Events130
- ↳ Swapmeets108
- Hot Rod Corner
- ↳ Ford Rods90
- ↳ Lead Sleds67
- Special Interest Groups
- ↳ The Flathead Forum139
- European marques
- ↳ MG Car Company2
- ↳ Mercedes-Benz2
In this Discussion
- 66patrick66 October 2005
- Jay_fresh773 October 2005
- ndesimone October 2005
Classic Chrysler Newport 68
-
hey check this baby out its most definetly a classic
it belonged to my grandfather its very clean runs smooth too it was
weekend driven car.
i cant afford two cars i already have a car so if anybody wants this baby let me
know im not going to be rigid on the price i dont have room for it and i cant afford another insurance bill so it has to go.
here is the link to the photos enjoy
http://car4sale.myphotoalbum.com
just email me if you have any questions
b_black773@hotmail.com -
sorry link is down please email me for pics
Jay_fresh773 wrote:hey check this baby out its most definetly a classic
it belonged to my grandfather its very clean runs smooth too it was
weekend driven car.
i cant afford two cars i already have a car so if anybody wants this baby let me
know im not going to be rigid on the price i dont have room for it and i cant afford another insurance bill so it has to go.
here is the link to the photos enjoy
http://car4sale.myphotoalbum.com
just email me if you have any questions
b_black773@hotmail.com -
-
-
Hi i am only asking $2930 or your best offer.......i am in chicago
-
Thats' to high for me, but it seems fair. Good Luck.
-
Okay Give Me an OFFER
-
I was born and raised in Chicago and know quite well what the weather will do to a car.
What kind of condition is the car? Has the salt and weather rusted out door panels, quarter panels and underside? It is hard to tell by the pictures.
Where in the Chicagoland area are you? -
Please view the pictures for yourself the car was and is garage kept
http://photos.yahoo.com/da_illest773 -
Hi well the car is in very good condition for its age.there is some minor rust but nothing that has turned into cancer yet.The trans is in wonderful condition engine is well kept isnt very load neither is the exhaust system.The brakes are good too i had them inspected they WILL need some pads very soon though.no rust in the trunk and floors are not rusted.Heat blows hot but no a/c compressor gone out. Um thats about it if you want i can email the pics THEY ARE LARGER so you can really inspect the pictures in full detail.the files are kinda big be aware. but let me know if i can email them too you
-
I would just want the motor. I'd have to hear it to even start pondering on a price.
-
So you WOULD rip this Pretty lady apARt FOR ONLY ITS MOTOR?
-
THis car is in VERY good condition its not show room but you wouldnt have to far to go to get to it. honestly the car is worth more than the value i posted due to its GOOD condition I really think you would be cheating yourself if you ripped her apart for just her motor.
-
I know it is in good cond. I just don't need another Chrysler right now. I have a couple '51 Windsors'. Wished I could check it out in person. but just can't....R.V.
-
the car is available if you want it.......I can give you the best price on it if your interested if not i do undersand
-
Jay, stay on the boards here and keep me updated on it.....R.V.
-
I can work something out with you just give me a price
-
Why yank the engine and trans out of something like this??? I can never understand that mentality!!! Find an engine and tranny, or a complete but trashed car to get your engine from!!! I've got a 63K mile 383 and tranny out of a 1968 Dodge Monaco, complete from oil pan to aircleaner, with a/c compressor, pulleys, brackets, exhaust manifolds, and all, and will not separate. It's a 2-bbl engine, bone-stock. A grand buys it all. Better that than pull a complete, nice car apart, don't you think????"The time has come", the Walrus said, "to speak of many things. Of shoes and ships and sealing wax, of cabbages and kings. And why the sea is boiling hot,
And whether pigs have wings..." -
66patrick66 wrote:Why yank the engine and trans out of something like this??? I can never understand that mentality!!! Find an engine and tranny, or a complete but trashed car to get your engine from!!! I've got a 63K mile 383 and tranny out of a 1968 Dodge Monaco, complete from oil pan to aircleaner, with a/c compressor, pulleys, brackets, exhaust manifolds, and all, and will not separate. It's a 2-bbl engine, bone-stock. A grand buys it all. Better that than pull a complete, nice car apart, don't you think????
No, I don't think. For 1, That motor in the 68 probably has 163,000 on it.
#2, I don't need no big a** Mopars. Although I am a Dodge guy. #3 I redo 30's-40's Mopars. #4, I would have to hear it run, and if it does; its only worth $400-$500 bucks in my opinion. Oh, it is just to big. I'll pass on something like that. If u can get hold of an old 50's st.wagon give me a hit............R.V.
I don't figure your mental state of mind dude?? Good Luck selling the boat. Happy Halloween....R.V. -
vestpuzzle1 wrote:No, I don't think. For 1, That motor in the 68 probably has 163,000 on it.
#2, I don't need no big a** Mopars. Although I am a Dodge guy. #3 I redo 30's-40's Mopars. #4, I would have to hear it run, and if it does; its only worth $400-$500 bucks in my opinion. Oh, it is just to big. I'll pass on something like that. If u can get hold of an old 50's st.wagon give me a hit............R.V. I don't figure your mental state of mind dude?? Good Luck selling the boat. Happy Halloween....R.V.
Here u go 66. Gotta' luv the wagons. LOL! :cool: Now here is a rare Mopar to rebuild. Thats' about new as I get. 1960 Plymouth. Don't mean to laugh, but u r funny. ( I like showing future projects.) -
The '68 is a real 63K-mile engine. I am the second owner of the car it came from. The car got sideswiped in the tornado two years ago, and that's the ONLY reason the eng/trans came out of it. So, before you go slamming something you have not seen, know the facts, first. Then, you say my engine is "too big" and yet, you want to pull another big block from a perfectly good car. Try being consistent.
The ability to use complete sentences, and not speaking like you're text-messaging someone helps, too.
Good luck on finding a running big-block, complete with everything, for $500.00 these days. A grand is the minimum you're gonna pay, and that's for just an engine! Keep looking, when you can't find another, mine is here.
PS - Call Shadynook Chrysler Salvage in Oklahama City, their number is listed. Ask HIM what a complete big-block set-up will cost you. :eek: Then, you'll see what I mean!"The time has come", the Walrus said, "to speak of many things. Of shoes and ships and sealing wax, of cabbages and kings. And why the sea is boiling hot,
And whether pigs have wings..." -
1968 chryser newport just check first post for pic link
-
I do hope u get what u want for that old Chrysler. It does look like it is in excellent shape........R.V.
-
Whatever...."The time has come", the Walrus said, "to speak of many things. Of shoes and ships and sealing wax, of cabbages and kings. And why the sea is boiling hot,
And whether pigs have wings..." -
Hey there,
Love 'ya man.....R.V. :o -
You're right."The time has come", the Walrus said, "to speak of many things. Of shoes and ships and sealing wax, of cabbages and kings. And why the sea is boiling hot,
And whether pigs have wings..." -
66patrick66 wrote:You're right.
But I still have the nicest projects in Okla. And remember; Don't hate the player. Hate the game. :cool:
